CRoboticHeadInterface.h

Go to the documentation of this file.

/* +------------------------------------------------------------------------+
   |                     Mobile Robot Programming Toolkit (MRPT)            |
   |                          http://www.mrpt.org/                          |
   |                                                                        |
   | Copyright (c) 2005-2017, Individual contributors, see AUTHORS file     |
   | See: http://www.mrpt.org/Authors - All rights reserved.                |
   | Released under BSD License. See details in http://www.mrpt.org/License |
   +------------------------------------------------------------------------+ */
 
#ifndef CRoboticHeadInterface_H
#define CRoboticHeadInterface_H
 
#include <mrpt/comms/CInterfaceFTDI.h>
#include <mrpt/utils/CMessage.h>
#include <mrpt/math/CMatrixTemplate.h>
#include <mrpt/utils/COutputLogger.h>
#include <mrpt/utils/CConfigFileBase.h>
#include <mrpt/obs/CObservationRange.h>
 
namespace mrpt
{
namespace hwdrivers
{
/**   This "software driver" implements the communication protocol for
 * interfacing a Robotic Head Board through a custom
  *   USB RS-422 interface board.
  *   In this class the "bind" is ignored since it is designed for USB
 * connections only, thus it internally generate the required object for
 * simplicity of use.
  *   The default serial number is "OREJA001"
  *
  * Warning: Avoid defining an object of this class in a global scope if you
 * want to catch all potential
  *      exceptions during the constructors (like USB interface DLL not found,
 * etc...)
  *
  *  \code
  *  PARAMETERS IN THE ".INI"-LIKE CONFIGURATION STRINGS:
  * -------------------------------------------------------
  *   [supplied_section_name]
  *   HEAD_serialNumber=OREJA001
  *   HEAD_gain=127,127,127
  *   HEAD_yaw=0                // initial yaw value
  *   HEAD_pitch=0              // initial tilt
  *  \endcode
  * \ingroup mrpt_hwdrivers_grp
  */
class CRoboticHeadInterface : public mrpt::utils::COutputLogger
{
   private:
        mrpt::comms::CInterfaceFTDI m_usbConnection;
        utils::CMessage msg;
        std::string m_serialNumber;
        std::vector<int32_t> gain;
        int head_yaw, head_pitch;
 
        // bool checkControllerIsConnected();
 
   protected:
        /** Loads specific configuration for the device from a given source of
         * configuration parameters, for example, an ".ini" file,
          *  loading from the section "[iniSection]" (see utils::CConfigFileBase and
         * derived classes)
          *  See hwdrivers::CSonarSRF10 for the possible parameters
          */
        void loadConfig_sensorSpecific(
                const mrpt::utils::CConfigFileBase* configSource,
                const std::string& iniSection);
 
   public:
        /** Constructor
          */
        CRoboticHeadInterface();
 
        /** Destructor
          */
        ~CRoboticHeadInterface() {}
        /** Changes the serial number of the device to open
          */
        void setDeviceSerialNumber(const std::string& deviceSerialNumber)
        {
                m_serialNumber = deviceSerialNumber;
        }
 
        /** Read the gain for the amplifier of the ear "channel", where channel is
         * 0, 1 or 2.
          */
        void GetGain(int& _gain, int& channel);
 
        /** Set the gain for the amplifier each ear. The value range is [0x00(min)
         * .. 0x7F(max)]. The value 0x80 set the resistor
          * in high impedance state, DON'T USE IT!!!
          */
        bool SetGain(int& new_gain, int& channel);
 
        /** This function return the angle where last sound where detected. This
         * angle is related to the robot pose, NOT head pose.
          * \code
          * angle > 0deg --> Sound detected in the left
          * angle = 0deg --> Sound detected in front of the head
          * angle < 0deg --> Sound detected in the right
          * \endcode
          */
        void GetSoundLocation(int& ang);
 
        /** Debug only!!! This function return the last 500 acquired samples for
         * each sound channel.
          *
          */
        void Get3SoundBuffer(mrpt::math::CMatrixTemplate<int>& buf);
 
        /** Move the head in:
           \code
          * elevation = 'yaw' degrees
          * orientation = 'pitch' degrees
          * \endcode
          */
        void SetHeadPose(int& yaw, int& pitch);
 
};  // End of class
 
}  // End of namespace
}  // end of namespace
 
#endif