CSICKTim561Eth_2050101.cpp

Go to the documentation of this file.

/* +------------------------------------------------------------------------+
   |                     Mobile Robot Programming Toolkit (MRPT)            |
   |                          http://www.mrpt.org/                          |
   |                                                                        |
   | Copyright (c) 2005-2018, Individual contributors, see AUTHORS file     |
   | See: http://www.mrpt.org/Authors - All rights reserved.                |
   | Released under BSD License. See details in http://www.mrpt.org/License |
   +------------------------------------------------------------------------+ */

// INCLUDE
#include "hwdrivers-precomp.h"  // Precompiled headers

#include <mrpt/hwdrivers/CSICKTim561Eth_2050101.h>
#include <mrpt/system/string_utils.h>

#include <iostream>
#include <sstream>
#include <string.h>

#define APPERTURE 4.712385  // in radian <=> 270

using namespace mrpt;
using namespace mrpt::system;
using namespace mrpt::hwdrivers;
using namespace mrpt::poses;
using namespace mrpt::obs;
using namespace std;

// CODE
IMPLEMENTS_GENERIC_SENSOR(CSICKTim561Eth, mrpt::hwdrivers)

/** Default Lidar IP: 192.168.0.1
 *  Default IP_port: 2111
 *  Maximum Range: 10 Meters
 *  Default SensorPose: Depend on robot(0, 270, 105)mm, orientation(0, 21.25, 0)
 */
CSICKTim561Eth::CSICKTim561Eth(string _ip, unsigned int _port)
    : m_ip(_ip),
      m_port(_port),
      m_client(),
      m_turnedOn(false),
      m_cmd(),
      m_connected(false),
      m_sensorPose(0.0, 0.0, 0.0, 0.0, 0.0, 0.0),
      m_maxRange(10.0),
      m_beamApperture(.25 * M_PI / 180.0)
{
    setVerbosityLevel(mrpt::system::LVL_DEBUG);
}

CSICKTim561Eth::~CSICKTim561Eth()
{
    if (m_connected) m_client.close();
    // delete m_client;
    // delete m_sensorPose;
}

void CSICKTim561Eth::initialize()
{
    if (!checkIsConnected())
    {
        THROW_EXCEPTION(
            "Cannot connect to SICK Tim561 Ethernet Sensor check your "
            "configuration"
            "file.");
    }
    turnOn();
}

void CSICKTim561Eth::loadConfig_sensorSpecific(
    const mrpt::config::CConfigFileBase& configSource,
    const std::string& iniSection)
{
    C2DRangeFinderAbstract::loadCommonParams(configSource, iniSection);
    float pose_x, pose_y, pose_z, pose_yaw, pose_pitch, pose_roll;

    pose_x = configSource.read_float(iniSection, "pose_x", 0, false);
    pose_y = configSource.read_float(iniSection, "pose_y", 0, false);
    pose_z = configSource.read_float(iniSection, "pose_z", 0, false);
    pose_yaw = configSource.read_float(iniSection, "pose_yaw", 0, false);
    pose_pitch = configSource.read_float(iniSection, "pose_pitch", 0, false);
    pose_roll = configSource.read_float(iniSection, "pose_roll", 0, false);
    m_ip = configSource.read_string(
        iniSection, "ip_address", "192.168.0.1", false);
    m_port = configSource.read_int(iniSection, "TCP_port", 2111, false);
    m_process_rate =
        configSource.read_int(iniSection, string("process_rate"), 15, false);
    m_sensorLabel =
        configSource.read_string(iniSection, "sensorLabel", "SICK", false);
    m_sensorPose = CPose3D(
        pose_x, pose_y, pose_z, DEG2RAD(pose_yaw), DEG2RAD(pose_pitch),
        DEG2RAD(pose_roll));
}

bool CSICKTim561Eth::checkIsConnected(void)
{
    if (m_connected)
    {
        return true;
    }
    else
    {
        try
        {
            m_client.connect(m_ip, m_port);
        }
        catch (std::exception& e)
        {
            MRPT_LOG_ERROR_FMT(
                "[SICKTIM561ETH] ERROR TRYING TO OPEN Ethernet DEVICE:\n%s",
                e.what());
            return false;
        }
    }
    m_connected = true;
    return true;
}

bool CSICKTim561Eth::rebootDev()
{
    {
        // Set Maintenance access mode to allow reboot to be sent
        char msg[] = {"sMN SetAccessMode 03 F4724744"};
        char msgIn[100];
        sendCommand(msg);

        size_t read = m_client.readAsync(msgIn, 100, 1000, 1000);
        msgIn[read - 1] = 0;
        MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
        MRPT_LOG_DEBUG_FMT("message : %s\n", string(&msgIn[1]).c_str());

        if (!read)
        {
            MRPT_LOG_ERROR(
                "SOPAS - Error setting access mode, unexpected response");
            return false;
        }
    }
    {
        // Send reboot command
        char msg[] = {"sMN mSCreboot"};
        char msgIn[100];
        sendCommand(msg);

        size_t read = m_client.readAsync(msgIn, 100, 1000, 1000);
        msgIn[read - 1] = 0;
        MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
        MRPT_LOG_DEBUG_FMT("message : %s\n", string(&msgIn[1]).c_str());

        if (!read)
        {
            MRPT_LOG_ERROR(
                "SOPAS - Error rebootting scanner, unexpected response.");
            return false;
        }
    }
    return true;
}

bool CSICKTim561Eth::turnOff()
{
    if (m_client.isConnected()) m_client.close();
    m_connected = false;
    m_turnedOn = false;
    return true;
}

bool CSICKTim561Eth::turnOn()
{
    /** From the SICK TIM561 datasheet:
     * * 1. Login: "sMN SetAccessMode 03 F4724744"
     * *    -wait answer: "sAN SetAccessMode 1"
     * * 2. Set Freq and Resolution: "sMN mLMPsetscancfg +1500 0 1800000"
     * *    -wait answer(0-180): "sAN mLMPsetscancfg 0 +1500 0 1800000"
     * * 3. Start measurement: "sMN LMCstartmeas"
     * *    -wait answer(0/1 yes/no): "sAN LMCstartmeas 0"
     * * 4. Stop measurement: "sMN LMCstopmeas"
     * *    -wait answer(0/1 yes/no): "sAN LMCstopmeas 0"
     *
     *
     * * z. Configure scandata context: "sWN LMDscandatacfg"
     * *    -wait answer
     *
     * * x. Read Freq and Angular:
     * *    -Get params: "sRN LMPscancfg"
     * *    -Read params(Freq, Sect, Resolution): "sRA LMPscancfg 1500 0
     * 1800000"
     */
    if (checkIsConnected())
    {
        try
        {
            /** Init scanner
             */
            {
                // Read 'DeviceIdent'
                char msg[] = {"sRIO"};
                char msgIn[100];
                sendCommand(msg);

                size_t read = m_client.readAsync(msgIn, 100, 1000, 1000);
                msgIn[read - 1] = 0;
                MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
                MRPT_LOG_DEBUG_FMT("message : %s\n", string(&msgIn[1]).c_str());

                if (!read)
                {
                    MRPT_LOG_ERROR(
                        "SOPAS - Error reading variable 'DeviceIdent'.");
                    return false;
                }
            }

            {
                // Read 'SerialNumber'
                char msg[] = {"sRN SerialNumber"};
                char msgIn[100];
                sendCommand(msg);

                size_t read = m_client.readAsync(msgIn, 100, 1000, 1000);
                msgIn[read - 1] = 0;
                MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
                MRPT_LOG_DEBUG_FMT("message : %s\n", string(&msgIn[1]).c_str());

                if (!read)
                {
                    MRPT_LOG_ERROR(
                        "SOPAS - Error reading variable 'SerialNumber'.");
                    return false;
                }
            }

            {
                // Read 'FirmwareVersion'
                char msg[] = {"sRN FirmwareVersion"};
                char msgIn[100];
                sendCommand(msg);

                size_t read = m_client.readAsync(msgIn, 100, 1000, 1000);
                msgIn[read - 1] = 0;
                MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
                MRPT_LOG_DEBUG_FMT("message : %s\n", string(&msgIn[1]).c_str());

                if (!read)
                {
                    MRPT_LOG_ERROR(
                        "SOPAS - Error reading variable 'FirmwareVersion'.");
                    return false;
                }
            }

            {
                // Read 'Device state'
                char msg[] = {"sRN SCdevicestate"};
                char msgIn[100];
                sendCommand(msg);

                size_t read = m_client.readAsync(msgIn, 100, 1000, 1000);
                msgIn[read - 1] = 0;
                MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
                MRPT_LOG_DEBUG_FMT("message : %s\n", string(&msgIn[1]).c_str());

                if (!read)
                {
                    MRPT_LOG_ERROR(
                        "SOPAS - Error reading variable 'devicestate'.");
                    return false;
                }
            }

            /** End Init Scanner
             */
            // {
            //   /** Login  TIM561
            //    */
            //   char msg[] = {"sMN SetAccessMode 03 F4724744"};
            //   char msgIn[100];
            //   sendCommand(msg);

            //   size_t  read = m_client.readAsync(msgIn, 100, 1000, 1000);
            //   msgIn[read - 1] = 0;
            //   MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
            //   MRPT_LOG_DEBUG_FMT("message : %s\n",
            //   string(&msgIn[1]).c_str());

            //   if (!read )
            //   {
            //     return false;
            //   }
            // }
            // while(true);
            /** Set Freq and Resolution
             */
            // {
            //   char msg[] = {"sMN mLMPsetscancfg +1500 +1 0 1800000"};
            //   char msgIn[100];
            //   sendCommand(msg);

            //   size_t read = m_client.readAsync(msgIn, 100, 1000, 1000);
            //   msgIn[read - 1] = 0;
            //   MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
            //   MRPT_LOG_DEBUG_FMT("message : %s\n",
            //   string(&msgIn[1]).c_str());

            //    if (!read)
            //   {
            //     return false;
            //   }
            // }

            /** Set scandatacfg
             */
            // {
            //   char msg[] = {"sWN LMDscandatacfg 01 00 0 1 0 00 00 0 0 0 0
            //   +1"}; char msgIn[100]; sendCommand(msg);

            //   size_t read =m_client.readAsync(msgIn, 100, 1000, 1000);
            //   msgIn[read - 1] = 0;
            //   MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
            //   MRPT_LOG_DEBUG_FMT("message : %s\n",
            //   string(&msgIn[1]).c_str()); if (!read){
            //     return false;
            //   }
            // }

            /** Set send data permanently
             */
            {
                char msg[] = {"sEN LMDscandata 1"};
                char msgIn[100];
                sendCommand(msg);
                size_t read = m_client.readAsync(msgIn, 100, 1000, 1000);
                msgIn[read - 1] = 0;
                MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
                MRPT_LOG_DEBUG_FMT("message : %s\n", string(&msgIn[1]).c_str());
                if (!read)
                {
                    MRPT_LOG_DEBUG("No LMSDATA");
                    return false;
                }
            }

            // {
            //    /** Start measurement
            //    */
            //   char msg[] = {"sMN LMCstartmeas"};
            //   char msgIn[100];
            //   sendCommand(msg);
            //   size_t read = m_client.readAsync(msgIn, 100, 1000, 1000);
            //   msgIn[read - 1] = 0;
            //   MRPT_LOG_DEBUG_FMT("read : %u\n", (unsigned int)read);
            //   MRPT_LOG_DEBUG_FMT("message : %s\n",
            //   string(&msgIn[1]).c_str()); if (!read)
            //   {
            //     return false;
            //   }
            // }
            m_turnedOn = true;
        }
        catch (std::exception& e)
        {
            MRPT_LOG_ERROR_FMT("%s", e.what());
            return false;
        }
    }
    else
    {
        return false;
    }
    return true;
}

void CSICKTim561Eth::sendCommand(const char* cmd)
{
    generateCmd(cmd);
    if (!m_cmd.empty())
    {
        m_client.writeAsync(&m_cmd[0], m_cmd.size());
    }
}

void CSICKTim561Eth::generateCmd(const char* cmd)
{
    if (strlen(cmd) > 995)
    {
        MRPT_LOG_ERROR("Error: command is too long.");
        return;
    }
    // m_cmd = format("%c%s%c", 0x02, cmd, 0x03);
    m_cmd = format("%c%s%c%c", 0x02, cmd, 0x03, 0);
}

bool CSICKTim561Eth::decodeScan(
    char* buff, CObservation2DRangeScan& outObservation)
{
    char* next;
    unsigned int idx = 0;
    unsigned int scanCount = 0;
    char* tmp;

    next = strtok(buff, " ", &tmp);

    while (next && scanCount == 0)
    {
        switch (++idx)
        {
            case 1:
                // If no "sRA" and also no "sSN", return false reading
                if (strncmp(&next[1], "sRA", 3) && strncmp(&next[1], "sSN", 3))
                {
                    return false;
                }
                break;
            case 2:
                if (strcmp(next, "LMDscandata"))
                {
                    return false;
                }
                break;
            case 6:
                if (strcmp(next, "1"))
                {
                    MRPT_LOG_DEBUG("Laser is ready");
                }
                else if (strcmp(next, "0"))
                {
                    MRPT_LOG_DEBUG("Laser is busy");
                }
                else
                {
                    MRPT_LOG_DEBUG("Laser reports error");
                    rebootDev();
                }
                break;
            case 21:
                if (strcmp(next, "DIST1"))
                {
                    THROW_EXCEPTION(
                        "TIM561 is not configured to send distances");
                    return false;
                }
                MRPT_LOG_DEBUG("Distance : OK\n");
                break;
            case 26:
                scanCount = strtoul(next, nullptr, 16);
                MRPT_LOG_DEBUG_FMT("Scan Count : %d\n", scanCount);
                break;
            default:
                break;
        }
        next = strtok(nullptr, " ", &tmp);
    }
    outObservation.aperture = (float)APPERTURE;
    outObservation.rightToLeft = false;
    outObservation.stdError = 0.012f;
    outObservation.sensorPose = m_sensorPose;
    outObservation.beamAperture = m_beamApperture;
    outObservation.maxRange = m_maxRange;
    outObservation.timestamp = mrpt::system::getCurrentTime();
    outObservation.sensorLabel = m_sensorLabel;

    outObservation.resizeScan(scanCount);
    unsigned int i;
    for (i = 0; i < scanCount && next; i++, next = strtok(nullptr, " ", &tmp))
    {
        outObservation.setScanRange(
            i, double(strtoul(next, nullptr, 16)) / 1000.0);
        outObservation.setScanRangeValidity(
            i, outObservation.getScanRange(i) <= outObservation.maxRange);
    }
    outObservation.resizeScan(i);
    return i >= scanCount;
}

void CSICKTim561Eth::doProcessSimple(
    bool& outThereIsObservation, CObservation2DRangeScan& outObservation,
    bool& hardwareError)
{
    if (!m_turnedOn)
    {
        hardwareError = true;
        outThereIsObservation = false;
        return;
    }
    hardwareError = false;

    char msg[] = {"sRN LMDscandata"};
    sendCommand(msg);
    char buffIn[16 * 1024];

    m_client.readAsync(buffIn, sizeof(buffIn), 40, 40);

    if (decodeScan(buffIn, outObservation))
    {
        // Filter:
        C2DRangeFinderAbstract::filterByExclusionAreas(outObservation);
        C2DRangeFinderAbstract::filterByExclusionAngles(outObservation);
        // Do show preview:
        C2DRangeFinderAbstract::processPreview(outObservation);
        MRPT_LOG_DEBUG("doProcessSimple Show");

        outThereIsObservation = true;
        hardwareError = false;
    }
    else
    {
        hardwareError = true;
        outThereIsObservation = false;
        MRPT_LOG_ERROR("doProcessSimple failed\n");
    }
}

void CSICKTim561Eth::doProcess()
{
    CObservation2DRangeScan::Ptr obs =
        mrpt::make_aligned_shared<CObservation2DRangeScan>();
    try
    {
        bool isThereObservation, hwError;
        doProcessSimple(isThereObservation, *obs, hwError);
        if (hwError)
        {
            m_state = ssError;
            MRPT_LOG_DEBUG("state Error");
        }
        else
        {
            m_state = ssWorking;
            MRPT_LOG_DEBUG("state working");
        }
        // if at least one data have been sensed:
        if (isThereObservation)
        {
            appendObservation(obs);
        }
    }
    catch (...)
    {
        m_state = ssError;
        THROW_EXCEPTION("No observation received from the Phidget board!");
    }
}

/** A method to set the sensor pose on the robot.
 */
void CSICKTim561Eth::setSensorPose(const CPose3D& _pose)
{
    m_sensorPose = _pose;
}