protocolhandler.cpp

Go to the documentation of this file.

/* +------------------------------------------------------------------------+
   |                     Mobile Robot Programming Toolkit (MRPT)            |
   |                          http://www.mrpt.org/                          |
   |                                                                        |
   | Copyright (c) 2005-2018, Individual contributors, see AUTHORS file     |
   | See: http://www.mrpt.org/Authors - All rights reserved.                |
   | Released under BSD License. See details in http://www.mrpt.org/License |
   +------------------------------------------------------------------------+ */
#include "protocolhandler.h"
#include <xsens/xsmessage.h>
#include <xsens/xsresultvalue.h>
#include <iomanip>
 
/*! \class ProtocolHandler
        \brief Message protocol handling class
 
        This class' purpose is to get valid messages according to its protocol from
   the raw
        data that is supplied to it. The default implementation (ProtocolHandler)
   implements
        the Xsens message protocol. To use a different protocol, overload the
   findMessage function.
 
        The class is intended to be state-less with respect to the data it handles.
*/
 
//! Default constructor
ProtocolHandler::ProtocolHandler() {}
//! Destructor
ProtocolHandler::~ProtocolHandler() {}
/*! \brief Compute the expected message size given a possibly incomplete message
        \details When analyzing a message with incomplete size information, the
   function
        will return the minimum size of the message given the information that is
   available
*/
int expectedMessageSize(const unsigned char* buffer, int sz)
{
        const XsMessageHeader* hdr = (const XsMessageHeader*)buffer;
        if (sz < 4)
                return XS_LEN_MSGHEADERCS;  // no size information available at all,
        // return a minimum message
 
        // we have size information
        if (hdr->m_length == XS_EXTLENCODE)
        {
                if (sz < 6)
                        return XS_EXTLENCODE + XS_LEN_MSGEXTHEADERCS;  // typical minimum
                // size at which
                // point extended
                // size is needed
 
                return XS_LEN_MSGEXTHEADERCS +
                           ((uint32_t)hdr->m_datlen.m_extended.m_length.m_high * 256 +
                                (uint32_t)hdr->m_datlen.m_extended.m_length.m_low);
        }
        return XS_LEN_MSGHEADERCS + (uint32_t)(hdr->m_length);
}
 
/*! \copydoc IProtocolHandler::findMessage
        \todo Since the assumption is that we receive a stream of valid messages
   without garbage, the scan
        is implemented in a rather naive and simple way. If we can expect lots of
   garbage in the data
        stream, this should probably be looked into.
*/
MessageLocation ProtocolHandler::findMessage(
        XsMessage& rcv, const XsByteArray& raw) const
{
        JLTRACE(gJournal, "Entry");
        MessageLocation rv(-1, 0);
        rcv.clear();
 
        int bufferSize = (int)raw.size();
        if (bufferSize == 0) return rv;
 
        const unsigned char* buffer = raw.data();
 
        // loop through the buffer to find a preamble
        for (int pre = 0; pre < bufferSize; ++pre)
        {
                if (buffer[pre] == XS_PREAMBLE)
                {
                        JLTRACE(gJournal, "Preamble found at " << pre);
                        // we found a preamble, see if we can read a message from here
                        if (rv.m_startPos == -1) rv.m_startPos = (int32_t)pre;
                        int remaining =
                                bufferSize -
                                pre;  // remaining bytes in buffer INCLUDING preamble
 
                        if (remaining < XS_LEN_MSGHEADERCS)
                        {
                                JLTRACE(gJournal, "Not enough header data read");
                                if (rv.m_startPos != pre) continue;
                                rv.m_size = -expectedMessageSize(&buffer[pre], remaining);
                                return rv;
                        }
 
                        // read header
                        const uint8_t* msgStart = &(buffer[pre]);
                        const XsMessageHeader* hdr = (const XsMessageHeader*)msgStart;
                        if (hdr->m_length == XS_EXTLENCODE)
                        {
                                if (remaining < XS_LEN_MSGEXTHEADERCS)
                                {
                                        JLTRACE(gJournal, "Not enough extended header data read");
                                        if (rv.m_startPos != pre) continue;
                                        rv.m_size = -expectedMessageSize(&buffer[pre], remaining);
                                        return rv;
                                }
                        }
                        else if (hdr->m_busId == 0 && hdr->m_messageId == 0)
                        {
                                // found 'valid' message that isn't actually valid... happens
                                // inside GPS raw data
                                // skip to next preamble
                                continue;
                        }
 
                        // check the reported size
                        int target = expectedMessageSize(&buffer[pre], remaining);
 
                        JLTRACE(
                                gJournal, "Bytes in buffer=" << remaining
                                                                                         << ", full target = " << target);
                        if (target > (XS_LEN_MSGEXTHEADERCS + XS_MAXDATALEN))
                        {
                                // skip current preamble
                                JLALERT(gJournal, "Invalid message length: " << target);
                                rv.m_startPos = -1;
                                continue;
                        }
 
                        if (remaining < target)
                        {
                                // not enough data read, skip current preamble
                                JLTRACE(
                                        gJournal, "Not enough data read: " << remaining << " / "
                                                                                                           << target);
                                if (rv.m_size == 0) rv.m_size = -target;
                                continue;
                        }
 
                        // we have read enough data to fulfill our target so we'll try to
                        // parse the message
                        // and check the checksum
                        // if (rcv->loadFromString(msgStart, (uint16_t) target) == XRV_OK)
                        if (rcv.loadFromString(msgStart, (uint16_t)target))
                        {
                                JLTRACE(
                                        gJournal,
                                        "OK, size = " << (int)rcv.getTotalMessageSize() << std::hex
                                                                  << std::setfill('0') << " First bytes "
                                                                  << std::setw(2) << (int)msgStart[0] << " "
                                                                  << std::setw(2) << (int)msgStart[1] << " "
                                                                  << std::setw(2) << (int)msgStart[2] << " "
                                                                  << std::setw(2) << (int)msgStart[3] << " "
                                                                  << std::setw(2) << (int)msgStart[4]
                                                                  << std::dec << std::setfill(' '));
                                rv.m_size = (int)rcv.getTotalMessageSize();
                                rv.m_startPos = pre;  // we do this again here because this may
                                // not be the first preamble encountered
                                // (the check for -1 at the start of the
                                // loop is necessary)
                                return rv;
                        }
 
                        // we could not read the message, clear message and try next
                        // preamble
                        rcv.clear();
                        if (rv.m_startPos == pre)
                        {
                                rv.m_startPos = -1;
                                JLALERT(
                                        gJournal, "Invalid checksum"
                                                                  << std::hex << std::setfill('0')
                                                                  << " First bytes " << std::setw(2)
                                                                  << (int)msgStart[0] << " " << std::setw(2)
                                                                  << (int)msgStart[1] << " " << std::setw(2)
                                                                  << (int)msgStart[2] << " " << std::setw(2)
                                                                  << (int)msgStart[3] << " " << std::setw(2)
                                                                  << (int)msgStart[4] << std::dec
                                                                  << std::setfill(' '));
                        }
                }
        }
        JLTRACE(gJournal, "Exit");
        return rv;
}
/*! \brief Returns the minimum size of a valid message of this protocol
 * including preambles and checksums */
int ProtocolHandler::minimumMessageSize() const
{
        return XS_LEN_MSGHEADERCS;  // minimum size of xsens xbus protocol message
}
 
/*! \brief Returns the maximum size of a valid message of this protocol
 * including preambles and checksums */
int ProtocolHandler::maximumMessageSize() const
{
        return XS_LEN_MSGEXTHEADERCS +
                   XS_MAXDATALEN;  // maximum size of xsens xbus protocol message
}
 
/*! \brief Compose a message for transmission
        \param raw The raw byte array to be constructed from the message
        \param msg The message to translate into a raw byte array
        \returns The size of the generated byte array
        \todo Generalize this method -> IProtocolHandler
*/
int ProtocolHandler::composeMessage(XsByteArray& raw, const XsMessage& msg)
{
        if (msg.getTotalMessageSize() <
                5)  // minimum size of an xsens message including envelope is 5 bytes
                return -1;
 
        raw.assign(msg.getTotalMessageSize(), msg.getMessageStart());
        return (int)raw.size();
}
 
int ProtocolHandler::type() const
{
        return 0;  // XPT_Xbus;
}