This "software driver" implements the communication protocol for interfacing a SICK LMS100 laser scanners through an ethernet controller.
This class does not need to be bind, i.e. you do not need to call C2DRangeFinderAbstract::bindIO. Connection is established when user call the turnOn() method. You can pass to the class's constructor the LMS100 's ip address and port. Device will be configured with the following parameters :
Important note: SICK LMS 1xx devices have two levels of configuration. In its present implementation, this class only handles one of them, so before using this class, you must "pre-configure" your scanner with the SICK's software "SOAP" (this software ships with the device), and set the framerate with this software. Of course, you have to pre-configure the device just once, then save that configuration in its flash memory.
To get a laser scan you must proceed like that :
The sensor pose on the vehicle could be loaded from an ini configuration file with :
This class doesn't configure the SICK LMS sensor, it is recomended to configure the sensor via the the SICK software : SOPAS.
Definition at line 63 of file CLMS100eth.h.
#include <mrpt/hwdrivers/CLMS100eth.h>
Public Types | |
enum | TSensorState { ssInitializing = 0, ssWorking, ssError } |
The current state of the sensor. More... | |
typedef std::multimap< mrpt::system::TTimeStamp, mrpt::utils::CSerializablePtr > | TListObservations |
typedef std::pair< mrpt::system::TTimeStamp, mrpt::utils::CSerializablePtr > | TListObsPair |
typedef CGenericSensorPtr | Ptr |
typedef std::shared_ptr< const CGenericSensor > | ConstPtr |
Public Member Functions | |
CLMS100Eth (std::string _ip=std::string("192.168.0.1"), unsigned int _port=2111) | |
Constructor. More... | |
virtual | ~CLMS100Eth () |
Destructor. More... | |
void | doProcessSimple (bool &outThereIsObservation, mrpt::obs::CObservation2DRangeScan &outObservation, bool &hardwareError) |
This function acquire a laser scan from the device. More... | |
bool | turnOn () |
This method must be called before trying to get a laser scan. More... | |
bool | turnOff () |
This method could be called manually to stop communication with the device. More... | |
void | setSensorPose (const mrpt::poses::CPose3D &_pose) |
A method to set the sensor pose on the robot. More... | |
void | doProcess () |
This method should be called periodically. More... | |
void | initialize () |
Initialize the sensor according to the parameters previously read in the configuration file. More... | |
void | showPreview (bool enable=true) |
Enables GUI visualization in real-time. More... | |
void | bindIO (mrpt::utils::CStream *streamIO) |
Binds the object to a given I/O channel. More... | |
void | getObservation (bool &outThereIsObservation, mrpt::obs::CObservation2DRangeScan &outObservation, bool &hardwareError) |
Get the last observation from the sensor, if available, and unmarks it as being "the last one" (thus a new scan must arrive or subsequent calls will find no new observations). More... | |
virtual const mrpt::hwdrivers::TSensorClassId * | GetRuntimeClass () const =0 |
TSensorState | getState () const |
The current state of the sensor. More... | |
double | getProcessRate () const |
std::string | getSensorLabel () const |
void | setSensorLabel (const std::string &sensorLabel) |
void | enableVerbose (bool enabled=true) |
Enable or disable extra debug info dumped to std::cout during sensor operation. More... | |
bool | isVerboseEnabled () const |
void | loadConfig (const mrpt::utils::CConfigFileBase &configSource, const std::string §ion) |
Loads the generic settings common to any sensor (See CGenericSensor), then call to "loadConfig_sensorSpecific". More... | |
void | getObservations (TListObservations &lstObjects) |
Returns a list of enqueued objects, emptying it (thread-safe). More... | |
virtual void | setPathForExternalImages (const std::string &directory) |
Set the path where to save off-rawlog image files (will be ignored in those sensors where this is not applicable). More... | |
void | setExternalImageFormat (const std::string &ext) |
Set the extension ("jpg","gif","png",...) that determines the format of images saved externally The default is "jpg". More... | |
void | setExternalImageJPEGQuality (const unsigned int quality) |
The quality of JPEG compression, when external images is enabled and the format is "jpg". More... | |
unsigned int | getExternalImageJPEGQuality () const |
Static Public Member Functions | |
static void | registerClass (const TSensorClassId *pNewClass) |
Register a class into the internal list of "CGenericSensor" descendents. More... | |
static CGenericSensor * | createSensor (const std::string &className) |
Creates a sensor by a name of the class. More... | |
static CGenericSensorPtr | createSensorPtr (const std::string &className) |
Just like createSensor, but returning a smart pointer to the newly created sensor object. More... | |
Protected Member Functions | |
void | loadConfig_sensorSpecific (const mrpt::utils::CConfigFileBase &configSource, const std::string &iniSection) |
Load sensor pose on the robot, or keep the default sensor pose. More... | |
void | loadCommonParams (const mrpt::utils::CConfigFileBase &configSource, const std::string &iniSection) |
Should be call by derived classes at "loadConfig" (loads exclusion areas AND exclusion angles). More... | |
void | filterByExclusionAreas (mrpt::obs::CObservation2DRangeScan &obs) const |
Mark as invalid those points which (x,y) coordinates fall within the exclusion polygons. More... | |
void | filterByExclusionAngles (mrpt::obs::CObservation2DRangeScan &obs) const |
Mark as invalid those ranges in a set of forbiden angle ranges. More... | |
void | processPreview (const mrpt::obs::CObservation2DRangeScan &obs) |
Must be called inside the capture method to allow optional GUI preview of scans. More... | |
void | appendObservations (const std::vector< mrpt::utils::CSerializablePtr > &obj) |
This method must be called by derived classes to enqueue a new observation in the list to be returned by getObservations. More... | |
void | appendObservation (const mrpt::utils::CSerializablePtr &obj) |
Like appendObservations() but for just one observation. More... | |
Protected Attributes | |
utils::CStream * | m_stream |
The I/O channel (will be NULL if not bound). More... | |
size_t | m_grab_decimation_counter |
Used when "m_grab_decimation" is enabled. More... | |
TSensorState | m_state |
bool | m_verbose |
std::string | m_path_for_external_images |
The path where to save off-rawlog images: empty means save images embedded in the rawlog. More... | |
std::string | m_external_images_format |
The extension ("jpg","gif","png",...) that determines the format of images saved externally. More... | |
unsigned int | m_external_images_jpeg_quality |
For JPEG images, the quality (default=95%). More... | |
Common settings to any sensor, loaded in "loadConfig" | |
double | m_process_rate |
See CGenericSensor. More... | |
size_t | m_max_queue_len |
See CGenericSensor. More... | |
size_t | m_grab_decimation |
If set to N>=2, only 1 out of N observations will be saved to m_objList. More... | |
std::string | m_sensorLabel |
See CGenericSensor. More... | |
Private Member Functions | |
void | generateCmd (const char *cmd) |
Add the start and end character. More... | |
bool | checkIsConnected () |
bool | decodeLogIn (char *msg) |
bool | decodeScanCfg (std::istringstream &stream) |
bool | decodeScanDataCfg (std::istringstream &stream) |
bool | decodeScan (char *buf, mrpt::obs::CObservation2DRangeScan &outObservation) |
void | sendCommand (const char *cmd) |
void | roughPrint (char *msg) |
Private Attributes | |
std::string | m_ip |
unsigned int | m_port |
mrpt::utils::CClientTCPSocket | m_client |
bool | m_turnedOn |
std::string | m_cmd |
bool | m_connected |
unsigned int | m_scanFrequency |
double | m_angleResolution |
double | m_startAngle |
double | m_stopAngle |
mrpt::poses::CPose3D | m_sensorPose |
double | m_maxRange |
double | m_beamApperture |
|
inherited |
Definition at line 124 of file CGenericSensor.h.
|
inherited |
Definition at line 123 of file CGenericSensor.h.
|
inherited |
Definition at line 89 of file CGenericSensor.h.
|
inherited |
Definition at line 90 of file CGenericSensor.h.
|
inherited |
The current state of the sensor.
Enumerator | |
---|---|
ssInitializing | |
ssWorking | |
ssError |
Definition at line 95 of file CGenericSensor.h.
CLMS100Eth::CLMS100Eth | ( | std::string | _ip = std::string("192.168.0.1") , |
unsigned int | _port = 2111 |
||
) |
Constructor.
Note that there is default arguments, here you can customize IP Adress and TCP Port of your device.
Definition at line 32 of file CLMS100eth.cpp.
|
virtual |
Destructor.
Close communcation with the device, and free memory.
Definition at line 46 of file CLMS100eth.cpp.
|
inlineprotectedinherited |
Like appendObservations() but for just one observation.
Definition at line 168 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CIMUXSens_MT4::doProcess(), mrpt::hwdrivers::CIMUXSens::doProcess(), mrpt::hwdrivers::CSkeletonTracker::doProcess(), mrpt::hwdrivers::CSwissRanger3DCamera::doProcess(), mrpt::hwdrivers::CIMUIntersense::doProcess(), mrpt::hwdrivers::CGyroKVHDSP3000::doProcess(), mrpt::hwdrivers::C2DRangeFinderAbstract::doProcess(), mrpt::hwdrivers::CCANBusReader::doProcess(), mrpt::hwdrivers::CVelodyneScanner::doProcess(), and mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow().
|
protectedinherited |
This method must be called by derived classes to enqueue a new observation in the list to be returned by getObservations.
Passed objects must be created in dynamic memory and a smart pointer passed. Example of creation:
If several observations are passed at once in the vector, they'll be considered as a block regarding the grabbing decimation factor.
Definition at line 53 of file CGenericSensor.cpp.
References CLASS_ID, mrpt::hwdrivers::CGenericSensor::m_csObjList, mrpt::hwdrivers::CGenericSensor::m_grab_decimation, mrpt::hwdrivers::CGenericSensor::m_grab_decimation_counter, mrpt::hwdrivers::CGenericSensor::m_objList, and THROW_EXCEPTION.
Referenced by mrpt::hwdrivers::CNationalInstrumentsDAQ::doProcess(), and mrpt::hwdrivers::CKinect::doProcess().
|
inherited |
Binds the object to a given I/O channel.
The stream object must not be deleted before the destruction of this class.
Definition at line 46 of file C2DRangeFinderAbstract.cpp.
References mrpt::synch::CCriticalSection::enter(), mrpt::synch::CCriticalSection::leave(), mrpt::hwdrivers::C2DRangeFinderAbstract::m_csChangeStream, and mrpt::hwdrivers::C2DRangeFinderAbstract::m_stream.
Referenced by mrpt::hwdrivers::CHokuyoURG::ensureStreamIsOpen().
|
private |
Definition at line 84 of file CLMS100eth.cpp.
References MRPT_LOG_ERROR_FMT.
|
staticinherited |
Creates a sensor by a name of the class.
Typically the user may want to create a smart pointer around the returned pointer, whis is made with:
Definition at line 103 of file CGenericSensor.cpp.
References mrpt::hwdrivers::CGenericSensor::get_registered_sensor_classes().
|
inlinestaticinherited |
Just like createSensor, but returning a smart pointer to the newly created sensor object.
Definition at line 201 of file CGenericSensor.h.
|
private |
|
private |
Definition at line 219 of file CLMS100eth.cpp.
References mrpt::obs::CObservation2DRangeScan::aperture, APPERTURE, mrpt::obs::CObservation2DRangeScan::beamAperture, mrpt::system::getCurrentTime(), mrpt::obs::CObservation2DRangeScan::getScanRange(), mrpt::obs::CObservation2DRangeScan::maxRange, MRPT_LOG_DEBUG, MRPT_LOG_DEBUG_FMT, MRPT_LOG_ERROR_FMT, mrpt::obs::CObservation2DRangeScan::resizeScan(), mrpt::obs::CObservation2DRangeScan::rightToLeft, mrpt::obs::CObservation::sensorLabel, mrpt::obs::CObservation2DRangeScan::sensorPose, mrpt::obs::CObservation2DRangeScan::setScanRange(), mrpt::obs::CObservation2DRangeScan::setScanRangeValidity(), mrpt::obs::CObservation2DRangeScan::stdError, mrpt::system::strtok(), THROW_EXCEPTION, and mrpt::obs::CObservation::timestamp.
|
private |
|
private |
|
virtual |
This method should be called periodically.
Period depend on the process_rate in the configuration file.
Reimplemented from mrpt::hwdrivers::C2DRangeFinderAbstract.
Definition at line 335 of file CLMS100eth.cpp.
References THROW_EXCEPTION.
|
virtual |
This function acquire a laser scan from the device.
If an error occured, hardwareError will be set to true. The new laser scan will be stored in the outObservation argument.
This | method throw exception if the frame received from the LMS 100 contain the following bad parameters :
|
Implements mrpt::hwdrivers::C2DRangeFinderAbstract.
Definition at line 297 of file CLMS100eth.cpp.
References MRPT_LOG_ERROR.
|
inlineinherited |
Enable or disable extra debug info dumped to std::cout during sensor operation.
Default: disabled unless the environment variable "MRPT_HWDRIVERS_VERBOSE" is set to "1" during object creation.
Definition at line 113 of file CGenericSensor.h.
|
protectedinherited |
Mark as invalid those ranges in a set of forbiden angle ranges.
Definition at line 174 of file C2DRangeFinderAbstract.cpp.
References mrpt::obs::CObservation2DRangeScan::filterByExclusionAngles(), and mrpt::hwdrivers::C2DRangeFinderAbstract::m_lstExclusionAngles.
Referenced by mrpt::hwdrivers::CRoboPeakLidar::doProcessSimple(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), and mrpt::hwdrivers::CHokuyoURG::doProcessSimple().
|
protectedinherited |
Mark as invalid those points which (x,y) coordinates fall within the exclusion polygons.
Definition at line 166 of file C2DRangeFinderAbstract.cpp.
References mrpt::obs::CObservation2DRangeScan::filterByExclusionAreas(), and mrpt::hwdrivers::C2DRangeFinderAbstract::m_lstExclusionPolys.
Referenced by mrpt::hwdrivers::CRoboPeakLidar::doProcessSimple(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), and mrpt::hwdrivers::CHokuyoURG::doProcessSimple().
|
private |
Add the start and end character.
Definition at line 208 of file CLMS100eth.cpp.
References mrpt::format(), and MRPT_LOG_ERROR.
|
inlineinherited |
Definition at line 255 of file CGenericSensor.h.
|
inherited |
Get the last observation from the sensor, if available, and unmarks it as being "the last one" (thus a new scan must arrive or subsequent calls will find no new observations).
Definition at line 56 of file C2DRangeFinderAbstract.cpp.
References mrpt::synch::CCriticalSection::enter(), mrpt::synch::CCriticalSection::leave(), mrpt::hwdrivers::C2DRangeFinderAbstract::m_csLastObservation, mrpt::hwdrivers::C2DRangeFinderAbstract::m_hardwareError, mrpt::hwdrivers::C2DRangeFinderAbstract::m_lastObservation, and mrpt::hwdrivers::C2DRangeFinderAbstract::m_lastObservationIsNew.
|
inherited |
Returns a list of enqueued objects, emptying it (thread-safe).
The objects must be freed by the invoker.
Definition at line 90 of file CGenericSensor.cpp.
References mrpt::hwdrivers::CGenericSensor::m_csObjList, and mrpt::hwdrivers::CGenericSensor::m_objList.
|
inlineinherited |
Definition at line 105 of file CGenericSensor.h.
|
pure virtualinherited |
|
inlineinherited |
Definition at line 107 of file CGenericSensor.h.
|
inlineinherited |
The current state of the sensor.
Definition at line 103 of file CGenericSensor.h.
Initialize the sensor according to the parameters previously read in the configuration file.
Reimplemented from mrpt::hwdrivers::CGenericSensor.
Definition at line 54 of file CLMS100eth.cpp.
References THROW_EXCEPTION.
|
inlineinherited |
Definition at line 114 of file CGenericSensor.h.
|
protectedinherited |
Should be call by derived classes at "loadConfig" (loads exclusion areas AND exclusion angles).
This loads a sequence of vertices of a polygon given by its (x,y) coordinates relative to the vehicle, that is, taking into account the "sensorPose".
The number of zones is variable, but they must start at 1 and be consecutive.
This also loads any other common params (e.g. 'preview')
Definition at line 102 of file C2DRangeFinderAbstract.cpp.
References ASSERT_, ASSERTMSG_, DEG2RAD, mrpt::format(), mrpt::hwdrivers::C2DRangeFinderAbstract::m_lstExclusionAngles, mrpt::hwdrivers::C2DRangeFinderAbstract::m_lstExclusionPolys, M_PI, mrpt::hwdrivers::C2DRangeFinderAbstract::m_showPreview, mrpt::utils::CConfigFileBase::read_bool(), mrpt::utils::CConfigFileBase::read_double(), and mrpt::utils::CConfigFileBase::read_vector().
Referenced by mrpt::hwdrivers::CSickLaserUSB::loadConfig_sensorSpecific(), mrpt::hwdrivers::CRoboPeakLidar::loadConfig_sensorSpecific(), mrpt::hwdrivers::CSickLaserSerial::loadConfig_sensorSpecific(), and mrpt::hwdrivers::CHokuyoURG::loadConfig_sensorSpecific().
|
inherited |
Loads the generic settings common to any sensor (See CGenericSensor), then call to "loadConfig_sensorSpecific".
This | method throws an exception with a descriptive message if some critical parameter is missing or has an invalid value. |
Definition at line 131 of file CGenericSensor.cpp.
References mrpt::hwdrivers::CGenericSensor::loadConfig_sensorSpecific(), mrpt::hwdrivers::CGenericSensor::m_grab_decimation, mrpt::hwdrivers::CGenericSensor::m_grab_decimation_counter, mrpt::hwdrivers::CGenericSensor::m_max_queue_len, mrpt::hwdrivers::CGenericSensor::m_process_rate, mrpt::hwdrivers::CGenericSensor::m_sensorLabel, MRPT_END, MRPT_START, mrpt::utils::CConfigFileBase::read_double(), mrpt::utils::CConfigFileBase::read_int(), and mrpt::utils::CConfigFileBase::read_string().
Referenced by mrpt::hwdrivers::prepareVideoSourceFromPanel(), and mrpt::hwdrivers::prepareVideoSourceFromUserSelection().
|
protectedvirtual |
Load sensor pose on the robot, or keep the default sensor pose.
Implements mrpt::hwdrivers::CGenericSensor.
Definition at line 63 of file CLMS100eth.cpp.
References DEG2RAD, mrpt::utils::CConfigFileBase::read_float(), mrpt::utils::CConfigFileBase::read_int(), and mrpt::utils::CConfigFileBase::read_string().
|
protectedinherited |
Must be called inside the capture method to allow optional GUI preview of scans.
Definition at line 180 of file C2DRangeFinderAbstract.cpp.
References mrpt::opengl::CPlanarLaserScan::Create(), mrpt::gui::CDisplayWindow3D::Create(), mrpt::hwdrivers::CGenericSensor::m_sensorLabel, mrpt::hwdrivers::C2DRangeFinderAbstract::m_showPreview, and mrpt::hwdrivers::C2DRangeFinderAbstract::m_win.
Referenced by mrpt::hwdrivers::CRoboPeakLidar::doProcessSimple(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), and mrpt::hwdrivers::CHokuyoURG::doProcessSimple().
|
staticinherited |
Register a class into the internal list of "CGenericSensor" descendents.
Used internally in the macros DEFINE_GENERIC_SENSOR, etc...
Can be used as "CGenericSensor::registerClass( SENSOR_CLASS_ID(CMySensor) );" if building custom sensors outside mrpt libraries in user code.
Definition at line 120 of file CGenericSensor.cpp.
References mrpt::hwdrivers::TSensorClassId::className, and mrpt::hwdrivers::CGenericSensor::get_registered_sensor_classes().
Referenced by mrpt::hwdrivers::CGenericSensor::CLASSINIT_GENERIC_SENSOR::CLASSINIT_GENERIC_SENSOR().
|
private |
|
private |
Definition at line 199 of file CLMS100eth.cpp.
|
inlineinherited |
Set the extension ("jpg","gif","png",...) that determines the format of images saved externally The default is "jpg".
Definition at line 247 of file CGenericSensor.h.
|
inlineinherited |
The quality of JPEG compression, when external images is enabled and the format is "jpg".
Definition at line 252 of file CGenericSensor.h.
References quality.
|
inlinevirtualinherited |
Set the path where to save off-rawlog image files (will be ignored in those sensors where this is not applicable).
An empty string (the default value at construction) means to save images embedded in the rawlog, instead of on separate files.
std::exception | If the directory doesn't exists and cannot be created. |
Reimplemented in mrpt::hwdrivers::CCameraSensor, mrpt::hwdrivers::CKinect, mrpt::hwdrivers::COpenNI2Sensor, mrpt::hwdrivers::COpenNI2_RGBD360, and mrpt::hwdrivers::CSwissRanger3DCamera.
Definition at line 238 of file CGenericSensor.h.
References MRPT_UNUSED_PARAM.
|
inlineinherited |
Definition at line 108 of file CGenericSensor.h.
void CLMS100Eth::setSensorPose | ( | const mrpt::poses::CPose3D & | _pose | ) |
A method to set the sensor pose on the robot.
Equivalent to setting the sensor pose via loading it from a config file.
Definition at line 359 of file CLMS100eth.cpp.
|
inlineinherited |
Enables GUI visualization in real-time.
Definition at line 95 of file C2DRangeFinderAbstract.h.
|
virtual |
This method could be called manually to stop communication with the device.
Method is also called by destructor.
Implements mrpt::hwdrivers::C2DRangeFinderAbstract.
Definition at line 101 of file CLMS100eth.cpp.
|
virtual |
This method must be called before trying to get a laser scan.
From the LMS100 datasheet : :
Implements mrpt::hwdrivers::C2DRangeFinderAbstract.
Definition at line 110 of file CLMS100eth.cpp.
References MRPT_LOG_DEBUG_FMT, MRPT_LOG_ERROR_FMT, and mrpt::system::sleep().
|
private |
Definition at line 111 of file CLMS100eth.h.
|
private |
Definition at line 116 of file CLMS100eth.h.
|
private |
Definition at line 106 of file CLMS100eth.h.
|
private |
Definition at line 108 of file CLMS100eth.h.
|
private |
Definition at line 109 of file CLMS100eth.h.
|
protectedinherited |
The extension ("jpg","gif","png",...) that determines the format of images saved externally.
Definition at line 152 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), and mrpt::hwdrivers::CSwissRanger3DCamera::loadConfig_sensorSpecific().
|
protectedinherited |
For JPEG images, the quality (default=95%).
Definition at line 153 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), and mrpt::hwdrivers::CSwissRanger3DCamera::loadConfig_sensorSpecific().
|
protectedinherited |
If set to N>=2, only 1 out of N observations will be saved to m_objList.
Definition at line 139 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CGenericSensor::appendObservations(), and mrpt::hwdrivers::CGenericSensor::loadConfig().
|
protectedinherited |
Used when "m_grab_decimation" is enabled.
Definition at line 144 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CGenericSensor::appendObservations(), and mrpt::hwdrivers::CGenericSensor::loadConfig().
|
private |
Definition at line 104 of file CLMS100eth.h.
|
protectedinherited |
See CGenericSensor.
Definition at line 138 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CGenericSensor::loadConfig().
|
private |
Definition at line 115 of file CLMS100eth.h.
|
protectedinherited |
The path where to save off-rawlog images: empty means save images embedded in the rawlog.
Definition at line 151 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), and mrpt::hwdrivers::CSwissRanger3DCamera::setPathForExternalImages().
|
private |
Definition at line 105 of file CLMS100eth.h.
|
protectedinherited |
See CGenericSensor.
Definition at line 137 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CGyroKVHDSP3000::initialize(), and mrpt::hwdrivers::CGenericSensor::loadConfig().
|
private |
Definition at line 110 of file CLMS100eth.h.
|
protectedinherited |
See CGenericSensor.
Definition at line 140 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CCANBusReader::CCANBusReader(), mrpt::hwdrivers::CGPSInterface::CGPSInterface(), mrpt::hwdrivers::CGyroKVHDSP3000::CGyroKVHDSP3000(), mrpt::hwdrivers::CHokuyoURG::CHokuyoURG(), mrpt::hwdrivers::CIMUIntersense::CIMUIntersense(), mrpt::hwdrivers::CIMUXSens::CIMUXSens(), mrpt::hwdrivers::CIMUXSens_MT4::CIMUXSens_MT4(), mrpt::hwdrivers::CKinect::CKinect(), mrpt::hwdrivers::CNationalInstrumentsDAQ::CNationalInstrumentsDAQ(), mrpt::hwdrivers::CRoboPeakLidar::CRoboPeakLidar(), mrpt::hwdrivers::CSickLaserSerial::CSickLaserSerial(), mrpt::hwdrivers::CSickLaserUSB::CSickLaserUSB(), mrpt::hwdrivers::CSkeletonTracker::CSkeletonTracker(), mrpt::hwdrivers::CSwissRanger3DCamera::CSwissRanger3DCamera(), mrpt::hwdrivers::CVelodyneScanner::CVelodyneScanner(), mrpt::hwdrivers::CIMUXSens_MT4::doProcess(), mrpt::hwdrivers::CIMUXSens::doProcess(), mrpt::hwdrivers::CSkeletonTracker::doProcess(), mrpt::hwdrivers::CGyroKVHDSP3000::doProcess(), mrpt::hwdrivers::CIMUIntersense::doProcess(), mrpt::hwdrivers::CRoboPeakLidar::doProcessSimple(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CCANBusReader::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), mrpt::hwdrivers::CHokuyoURG::doProcessSimple(), mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow(), mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), mrpt::hwdrivers::CKinect::getNextObservation(), mrpt::hwdrivers::CVelodyneScanner::getNextObservation(), mrpt::hwdrivers::CNationalInstrumentsDAQ::grabbing_thread(), mrpt::hwdrivers::CGenericSensor::loadConfig(), mrpt::hwdrivers::CSkeletonTracker::processPreview(), mrpt::hwdrivers::C2DRangeFinderAbstract::processPreview(), and mrpt::hwdrivers::CSkeletonTracker::processPreviewNone().
|
private |
Definition at line 114 of file CLMS100eth.h.
|
private |
Definition at line 112 of file CLMS100eth.h.
|
protectedinherited |
Definition at line 146 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CGyroKVHDSP3000::CGyroKVHDSP3000(), mrpt::hwdrivers::CIMUXSens_MT4::doProcess(), mrpt::hwdrivers::CIMUXSens::doProcess(), mrpt::hwdrivers::CSkeletonTracker::doProcess(), mrpt::hwdrivers::CSwissRanger3DCamera::doProcess(), mrpt::hwdrivers::CIMUIntersense::doProcess(), mrpt::hwdrivers::CGyroKVHDSP3000::doProcess(), mrpt::hwdrivers::C2DRangeFinderAbstract::doProcess(), mrpt::hwdrivers::CGPSInterface::doProcess(), mrpt::hwdrivers::CNationalInstrumentsDAQ::doProcess(), mrpt::hwdrivers::CKinect::doProcess(), mrpt::hwdrivers::CVelodyneScanner::doProcess(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CCANBusReader::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), mrpt::hwdrivers::CHokuyoURG::doProcessSimple(), mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow(), mrpt::hwdrivers::CVelodyneScanner::getNextObservation(), mrpt::hwdrivers::CIMUXSens_MT4::initialize(), mrpt::hwdrivers::CIMUXSens::initialize(), mrpt::hwdrivers::CSkeletonTracker::initialize(), mrpt::hwdrivers::CIMUIntersense::initialize(), mrpt::hwdrivers::CGyroKVHDSP3000::initialize(), mrpt::hwdrivers::CVelodyneScanner::initialize(), mrpt::hwdrivers::CNationalInstrumentsDAQ::readFromDAQ(), and mrpt::hwdrivers::CIMUXSens::searchPortAndConnect().
|
private |
Definition at line 113 of file CLMS100eth.h.
|
protectedinherited |
The I/O channel (will be NULL if not bound).
Definition at line 58 of file C2DRangeFinderAbstract.h.
Referenced by mrpt::hwdrivers::CHokuyoURG::assureBufferHasBytes(), mrpt::hwdrivers::C2DRangeFinderAbstract::bindIO(), mrpt::hwdrivers::CHokuyoURG::ensureStreamIsOpen(), mrpt::hwdrivers::CSickLaserSerial::LMS_endContinuousMode(), mrpt::hwdrivers::CSickLaserSerial::LMS_sendMeasuringMode_cm_mm(), mrpt::hwdrivers::CSickLaserSerial::LMS_setupBaudrate(), mrpt::hwdrivers::CSickLaserSerial::LMS_setupSerialComms(), mrpt::hwdrivers::CSickLaserSerial::LMS_startContinuousMode(), mrpt::hwdrivers::CSickLaserSerial::LMS_statusQuery(), mrpt::hwdrivers::CSickLaserSerial::LMS_waitACK(), mrpt::hwdrivers::CSickLaserSerial::LMS_waitIncomingFrame(), mrpt::hwdrivers::CHokuyoURG::purgeBuffers(), mrpt::hwdrivers::CHokuyoURG::sendCmd(), mrpt::hwdrivers::CSickLaserSerial::SendCommandToSICK(), mrpt::hwdrivers::CSickLaserSerial::tryToOpenComms(), mrpt::hwdrivers::CHokuyoURG::turnOn(), mrpt::hwdrivers::CSickLaserSerial::waitContinuousSampleFrame(), mrpt::hwdrivers::CHokuyoURG::~CHokuyoURG(), and mrpt::hwdrivers::CSickLaserSerial::~CSickLaserSerial().
|
private |
Definition at line 107 of file CLMS100eth.h.
|
protectedinherited |
Definition at line 147 of file CGenericSensor.h.
Referenced by mrpt::hwdrivers::CGenericSensor::CGenericSensor(), mrpt::hwdrivers::CRoboPeakLidar::checkCOMMs(), mrpt::hwdrivers::CNTRIPEmitter::doProcess(), mrpt::hwdrivers::CGPSInterface::doProcess(), mrpt::hwdrivers::CNationalInstrumentsDAQ::grabbing_thread(), mrpt::hwdrivers::CIMUXSens_MT4::initialize(), mrpt::hwdrivers::CHokuyoURG::initialize(), mrpt::hwdrivers::CVelodyneScanner::internal_read_PCAP_packet(), mrpt::hwdrivers::CGPSInterface::JAVAD_sendMessage(), mrpt::hwdrivers::CGPSInterface::legacy_topcon_setup_commands(), mrpt::hwdrivers::CGPSInterface::OnConnectionEstablished(), mrpt::hwdrivers::CGPSInterface::OnConnectionShutdown(), mrpt::hwdrivers::CNationalInstrumentsDAQ::stop(), and mrpt::hwdrivers::CGPSInterface::tryToOpenTheCOM().
Page generated by Doxygen 1.8.14 for MRPT 1.5.9 Git: 690a4699f Wed Apr 15 19:29:53 2020 +0200 at mié abr 15 19:30:12 CEST 2020 |