CKinect.cpp

Go to the documentation of this file.

/* +------------------------------------------------------------------------+
   |                     Mobile Robot Programming Toolkit (MRPT)            |
   |                          https://www.mrpt.org/                         |
   |                                                                        |
   | Copyright (c) 2005-2020, Individual contributors, see AUTHORS file     |
   | See: https://www.mrpt.org/Authors - All rights reserved.               |
   | Released under BSD License. See: https://www.mrpt.org/License          |
   +------------------------------------------------------------------------+ */

#include "hwdrivers-precomp.h"  // Precompiled headers

#include <mrpt/hwdrivers/CKinect.h>
#include <mrpt/img/TStereoCamera.h>
#include <mrpt/poses/CPose3DQuat.h>
#include <mrpt/system/CTimeLogger.h>

// Universal include for all versions of OpenCV
#include <mrpt/3rdparty/do_opencv_includes.h>

using namespace mrpt::hwdrivers;
using namespace mrpt::system;
using namespace mrpt::serialization;
using namespace mrpt::math;
using namespace mrpt::obs;
using namespace mrpt::poses;
using namespace std;

IMPLEMENTS_GENERIC_SENSOR(CKinect, mrpt::hwdrivers)

// Whether to profile memory allocations:
//#define KINECT_PROFILE_MEM_ALLOC

#if MRPT_HAS_KINECT_FREENECT
#if defined(__APPLE__)
#include <libfreenect/libfreenect.h>
#else
#include <libfreenect.h>
#endif
#else
#define KINECT_W 640
#define KINECT_H 480
#endif

#if MRPT_HAS_KINECT_FREENECT
// Macros to convert the opaque pointers in the class header:
#define f_ctx reinterpret_cast<freenect_context*>(m_f_ctx)
#define f_ctx_ptr reinterpret_cast<freenect_context**>(&m_f_ctx)
#define f_dev reinterpret_cast<freenect_device*>(m_f_dev)
#define f_dev_ptr reinterpret_cast<freenect_device**>(&m_f_dev)
#endif  // MRPT_HAS_KINECT_FREENECT

#ifdef KINECT_PROFILE_MEM_ALLOC
mrpt::system::CTimeLogger alloc_tim;
#endif
// int int a;

void CKinect::calculate_range2meters()
{
#ifdef MRPT_KINECT_DEPTH_10BIT
    const float k1 = 1.1863f;
    const float k2 = 2842.5f;
    const float k3 = 0.1236f;

    for (size_t i = 0; i < KINECT_RANGES_TABLE_LEN; i++)
        m_range2meters[i] =
            static_cast<uint16_t>(k3 * tanf(i / k2 + k1) / 1e-3f);

#else
    for (size_t i = 0; i < KINECT_RANGES_TABLE_LEN; i++)
        m_range2meters[i] =
            static_cast<uint16_t>(1e+3f / (i * (-0.0030711016) + 3.3309495161));
#endif

    // Minimum/Maximum range means error:
    m_range2meters[0] = 0;
    m_range2meters[KINECT_RANGES_TABLE_LEN - 1] = 0;
}

/*-------------------------------------------------------------
        ctor
 -------------------------------------------------------------*/
CKinect::CKinect()
    : m_sensorPoseOnRobot(),
      m_relativePoseIntensityWRTDepth(
          0, -0.02, 0, -90.0_deg, 0.0_deg, -90.0_deg)
{
    calculate_range2meters();

    // Get maximum range:
    // Recall: r[Max-1] means error.
    m_maxRange = m_range2meters[KINECT_RANGES_TABLE_LEN - 2];

    // Default label:
    m_sensorLabel = "KINECT";

    // =========== Default params ===========
    // ----- RGB -----
    m_cameraParamsRGB.ncols =
        640;  // By default set 640x480, on connect we'll update this.
    m_cameraParamsRGB.nrows = 480;

    m_cameraParamsRGB.cx(328.94272028759258);
    m_cameraParamsRGB.cy(267.48068171871557);
    m_cameraParamsRGB.fx(529.2151);
    m_cameraParamsRGB.fy(525.5639);

    m_cameraParamsRGB.dist.fill(0);

    // ----- Depth -----
    m_cameraParamsDepth.ncols = 640;
    m_cameraParamsDepth.nrows = 488;

    m_cameraParamsDepth.cx(339.30781);
    m_cameraParamsDepth.cy(242.7391);
    m_cameraParamsDepth.fx(594.21434);
    m_cameraParamsDepth.fy(591.04054);

    m_cameraParamsDepth.dist.fill(0);

#if !MRPT_HAS_KINECT
    THROW_EXCEPTION(
        "MRPT was compiled without support for Kinect. Please, rebuild it.");
#endif
}

/*-------------------------------------------------------------
            dtor
 -------------------------------------------------------------*/
CKinect::~CKinect() { this->close(); }
/** This method can or cannot be implemented in the derived class, depending on
 * the need for it.
 *  \exception This method must throw an exception with a descriptive message if
 * some critical error is found.
 */
void CKinect::initialize() { open(); }
/** This method will be invoked at a minimum rate of "process_rate" (Hz)
 *  \exception This method must throw an exception with a descriptive message if
 * some critical error is found.
 */
void CKinect::doProcess()
{
    bool thereIs, hwError;

    CObservation3DRangeScan::Ptr newObs =
        std::make_shared<CObservation3DRangeScan>();
    CObservationIMU::Ptr newObs_imu = std::make_shared<CObservationIMU>();

    getNextObservation(*newObs, *newObs_imu, thereIs, hwError);

    if (hwError)
    {
        m_state = ssError;
        THROW_EXCEPTION("Couldn't communicate to the Kinect sensor!");
    }

    if (thereIs)
    {
        m_state = ssWorking;

        vector<CSerializable::Ptr> objs;
        if (m_grab_image || m_grab_depth || m_grab_3D_points)
            objs.push_back(newObs);
        if (m_grab_IMU) objs.push_back(newObs_imu);

        appendObservations(objs);
    }
}

/** Loads specific configuration for the device from a given source of
 * configuration parameters, for example, an ".ini" file, loading from the
 * section "[iniSection]" (see config::CConfigFileBase and derived classes)
 *  \exception This method must throw an exception with a descriptive message if
 * some critical parameter is missing or has an invalid value.
 */
void CKinect::loadConfig_sensorSpecific(
    const mrpt::config::CConfigFileBase& configSource,
    const std::string& iniSection)
{
    m_sensorPoseOnRobot.setFromValues(
        configSource.read_float(iniSection, "pose_x", 0),
        configSource.read_float(iniSection, "pose_y", 0),
        configSource.read_float(iniSection, "pose_z", 0),
        DEG2RAD(configSource.read_float(iniSection, "pose_yaw", 0)),
        DEG2RAD(configSource.read_float(iniSection, "pose_pitch", 0)),
        DEG2RAD(configSource.read_float(iniSection, "pose_roll", 0)));

    m_preview_window =
        configSource.read_bool(iniSection, "preview_window", m_preview_window);

    // "Stereo" calibration data:
    // [<SECTION>_LEFT]  // Depth
    //   ...
    // [<SECTION>_RIGHT] // RGB
    //   ...
    // [<SECTION>_LEFT2RIGHT_POSE]
    //  pose_quaternion = [x y z qr qx qy qz]

    const mrpt::poses::CPose3D twist(0, 0, 0, -90.0_deg, 0.0_deg, -90.0_deg);

    mrpt::img::TStereoCamera sc;
    sc.leftCamera = m_cameraParamsDepth;  // Load default values so that if we
    // fail to load from cfg at least we
    // have some reasonable numbers.
    sc.rightCamera = m_cameraParamsRGB;
    sc.rightCameraPose =
        mrpt::poses::CPose3DQuat(m_relativePoseIntensityWRTDepth - twist)
            .asTPose();

    try
    {
        sc.loadFromConfigFile(iniSection, configSource);
    }
    catch (const std::exception& e)
    {
        std::cout << "[CKinect::loadConfig_sensorSpecific] Warning: Ignoring "
                     "error loading calibration parameters:\n"
                  << e.what();
    }
    m_cameraParamsDepth = sc.leftCamera;
    m_cameraParamsRGB = sc.rightCamera;
    m_relativePoseIntensityWRTDepth =
        twist + mrpt::poses::CPose3D(sc.rightCameraPose);

    // Id:
    m_user_device_number = configSource.read_int(
        iniSection, "device_number", m_user_device_number);

    m_grab_image =
        configSource.read_bool(iniSection, "grab_image", m_grab_image);
    m_grab_depth =
        configSource.read_bool(iniSection, "grab_depth", m_grab_depth);
    m_grab_3D_points =
        configSource.read_bool(iniSection, "grab_3D_points", m_grab_3D_points);
    m_grab_IMU = configSource.read_bool(iniSection, "grab_IMU", m_grab_IMU);

    m_video_channel = configSource.read_enum<TVideoChannel>(
        iniSection, "video_channel", m_video_channel);

    {
        std::string s = configSource.read_string(
            iniSection, "relativePoseIntensityWRTDepth", "");
        if (!s.empty()) m_relativePoseIntensityWRTDepth.fromString(s);
    }

    m_initial_tilt_angle = configSource.read_int(
        iniSection, "initial_tilt_angle", m_initial_tilt_angle);
}

bool CKinect::isOpen() const
{
#if MRPT_HAS_KINECT_FREENECT
    return f_dev != nullptr;
#else
    return false;
#endif

#
}

#if MRPT_HAS_KINECT_FREENECT
// ========  GLOBAL CALLBACK FUNCTIONS ========
void depth_cb(freenect_device* dev, void* v_depth, uint32_t timestamp)
{
    const freenect_frame_mode frMode = freenect_get_current_video_mode(dev);

    auto* depth = reinterpret_cast<uint16_t*>(v_depth);

    auto* obj = reinterpret_cast<CKinect*>(freenect_get_user(dev));

    // Update of the timestamps at the end:
    std::lock_guard<std::mutex> lock(obj->internal_latest_obs_cs());
    CObservation3DRangeScan& obs = obj->internal_latest_obs();

    obs.hasRangeImage = true;
    obs.range_is_depth = true;

#ifdef KINECT_PROFILE_MEM_ALLOC
    alloc_tim.enter("depth_cb alloc");
#endif

    // This method will try to exploit memory pooling if possible:
    obs.rangeImage_setSize(frMode.height, frMode.width);

#ifdef KINECT_PROFILE_MEM_ALLOC
    alloc_tim.leave("depth_cb alloc");
#endif

    const CKinect::TDepth2RangeArray& r2m = obj->getRawDepth2RangeConversion();
    obs.rangeUnits = 1e-3f;  // we use mm as units

    for (int r = 0; r < frMode.height; r++)
        for (int c = 0; c < frMode.width; c++)
        {
            // For now, quickly save the depth as it comes from the sensor,
            // it'll
            //  transformed later on in getNextObservation()
            const uint16_t v = *depth++;
            obs.rangeImage.coeffRef(r, c) = r2m[v & KINECT_RANGES_TABLE_MASK];
        }
    obj->internal_tim_latest_depth() = timestamp;
}

void rgb_cb(freenect_device* dev, void* img_data, uint32_t timestamp)
{
    auto* obj = reinterpret_cast<CKinect*>(freenect_get_user(dev));
    const freenect_frame_mode frMode = freenect_get_current_video_mode(dev);

    // Update of the timestamps at the end:
    std::lock_guard<std::mutex> lock(obj->internal_latest_obs_cs());
    CObservation3DRangeScan& obs = obj->internal_latest_obs();

#ifdef KINECT_PROFILE_MEM_ALLOC
    alloc_tim.enter("depth_rgb loadFromMemoryBuffer");
#endif

    obs.hasIntensityImage = true;
    if (obj->getVideoChannel() == CKinect::VIDEO_CHANNEL_RGB)
    {
        // Color image: We asked for Bayer data, so we can decode it outselves
        // here
        //  and avoid having to reorder Green<->Red channels, as would be needed
        //  with
        //  the RGB image from freenect.
        obs.intensityImageChannel =
            mrpt::obs::CObservation3DRangeScan::CH_VISIBLE;
        obs.intensityImage.resize(
            frMode.width, frMode.height, mrpt::img::CH_RGB);

#if MRPT_HAS_OPENCV
        const cv::Mat src_img_bayer(
            frMode.height, frMode.width, CV_8UC1, img_data, frMode.width);

        cv::Mat& dst_img_RGB = obs.intensityImage.asCvMatRef();

        // Decode Bayer image:
        cv::cvtColor(src_img_bayer, dst_img_RGB, cv::COLOR_BayerGB2BGR);
#else
        THROW_EXCEPTION("Need building with OpenCV!");
#endif
    }
    else
    {
        // IR data: grayscale 8bit
        obs.intensityImageChannel = mrpt::obs::CObservation3DRangeScan::CH_IR;
        obs.intensityImage.loadFromMemoryBuffer(
            frMode.width, frMode.height,
            false,  // Color image?
            reinterpret_cast<unsigned char*>(img_data));
    }

    // obs.intensityImage.setChannelsOrder_RGB();

#ifdef KINECT_PROFILE_MEM_ALLOC
    alloc_tim.leave("depth_rgb loadFromMemoryBuffer");
#endif

    obj->internal_tim_latest_rgb() = timestamp;
}
// ========  END OF GLOBAL CALLBACK FUNCTIONS ========
#endif  // MRPT_HAS_KINECT_FREENECT

void CKinect::open()
{
    if (isOpen()) close();

    // Alloc memory, if this is the first time:
    m_buf_depth.resize(640 * 480 * 3);  // We'll resize this below if needed
    m_buf_rgb.resize(640 * 480 * 3);

#if MRPT_HAS_KINECT_FREENECT  // ----> libfreenect
    // Try to open the device:
    if (freenect_init(f_ctx_ptr, nullptr) < 0)
        THROW_EXCEPTION("freenect_init() failed");

    freenect_set_log_level(
        f_ctx,
#ifdef _DEBUG
        FREENECT_LOG_DEBUG
#else
        FREENECT_LOG_WARNING
#endif
    );

    int nr_devices = freenect_num_devices(f_ctx);
    // printf("[CKinect] Number of devices found: %d\n", nr_devices);

    if (!nr_devices) THROW_EXCEPTION("No Kinect devices found.");

    // Open the given device number:
    if (freenect_open_device(f_ctx, f_dev_ptr, m_user_device_number) < 0)
        THROW_EXCEPTION_FMT(
            "Error opening Kinect sensor with index: %d", m_user_device_number);

    // Setup:
    if (m_initial_tilt_angle != 360)  // 360 means no motor command.
        setTiltAngleDegrees(m_initial_tilt_angle);
    freenect_set_led(f_dev, LED_RED);
    freenect_set_depth_callback(f_dev, depth_cb);
    freenect_set_video_callback(f_dev, rgb_cb);

    // rgb or IR channel:
    const freenect_frame_mode desiredFrMode = freenect_find_video_mode(
        FREENECT_RESOLUTION_MEDIUM,
        m_video_channel == VIDEO_CHANNEL_IR
            ? FREENECT_VIDEO_IR_8BIT
            : FREENECT_VIDEO_BAYER  // FREENECT_VIDEO_RGB: Use Bayer instead so
        // we can directly decode it here
    );

    // Switch to that video mode:
    if (freenect_set_video_mode(f_dev, desiredFrMode) < 0)
        THROW_EXCEPTION("Error setting Kinect video mode.");

    // Get video mode:
    const freenect_frame_mode frMode = freenect_get_current_video_mode(f_dev);

    // Realloc mem:
    m_buf_depth.resize(frMode.width * frMode.height * 3);
    m_buf_rgb.resize(frMode.width * frMode.height * 3);

    // Save resolution:
    m_cameraParamsRGB.ncols = frMode.width;
    m_cameraParamsRGB.nrows = frMode.height;

    m_cameraParamsDepth.ncols = frMode.width;
    m_cameraParamsDepth.nrows = frMode.height;

    freenect_set_video_buffer(f_dev, &m_buf_rgb[0]);
    freenect_set_depth_buffer(f_dev, &m_buf_depth[0]);

    freenect_set_depth_mode(
        f_dev, freenect_find_depth_mode(
                   FREENECT_RESOLUTION_MEDIUM, FREENECT_DEPTH_10BIT));

    // Set user data = pointer to "this":
    freenect_set_user(f_dev, this);

    if (freenect_start_depth(f_dev) < 0)
        THROW_EXCEPTION("Error starting depth streaming.");

    if (freenect_start_video(f_dev) < 0)
        THROW_EXCEPTION("Error starting video streaming.");

#endif  // MRPT_HAS_KINECT_FREENECT
}

void CKinect::close()
{
#if MRPT_HAS_KINECT_FREENECT
    if (f_dev)
    {
        freenect_stop_depth(f_dev);
        freenect_stop_video(f_dev);
        freenect_close_device(f_dev);
    }
    m_f_dev = nullptr;

    if (f_ctx) freenect_shutdown(f_ctx);
    m_f_ctx = nullptr;
#endif  // MRPT_HAS_KINECT_FREENECT
}

/** Changes the video channel to open (RGB or IR) - you can call this method
   before start grabbing or in the middle of streaming and the video source will
   change on the fly.
    Default is RGB channel.
*/
void CKinect::setVideoChannel([[maybe_unused]] const TVideoChannel vch)
{
#if MRPT_HAS_KINECT_FREENECT
    m_video_channel = vch;
    if (!isOpen()) return;  // Nothing else to do here.

    // rgb or IR channel:
    freenect_stop_video(f_dev);

    // rgb or IR channel:
    const freenect_frame_mode desiredFrMode = freenect_find_video_mode(
        FREENECT_RESOLUTION_MEDIUM,
        m_video_channel == VIDEO_CHANNEL_IR
            ? FREENECT_VIDEO_IR_8BIT
            : FREENECT_VIDEO_BAYER  // FREENECT_VIDEO_RGB: Use Bayer instead so
        // we can directly decode it here
    );

    // Switch to that video mode:
    if (freenect_set_video_mode(f_dev, desiredFrMode) < 0)
        THROW_EXCEPTION("Error setting Kinect video mode.");

    freenect_start_video(f_dev);

#endif  // MRPT_HAS_KINECT_FREENECT
}

/** The main data retrieving function, to be called after calling loadConfig()
 * and initialize().
 *  \param out_obs The output retrieved observation (only if
 * there_is_obs=true).
 *  \param there_is_obs If set to false, there was no new observation.
 *  \param hardware_error True on hardware/comms error.
 *
 * \sa doProcess
 */
void CKinect::getNextObservation(
    mrpt::obs::CObservation3DRangeScan& m_out_obs, bool& there_is_obs,
    bool& hardware_error)
{
    there_is_obs = false;
    hardware_error = false;

#if MRPT_HAS_KINECT_FREENECT

    using namespace std::chrono_literals;
    const auto max_wait = 40ms;  // 1/25 FPS

    // Mark previous observation's timestamp as out-dated:
    m_latest_obs.hasPoints3D = false;
    m_latest_obs.hasRangeImage = false;
    m_latest_obs.hasIntensityImage = false;
    m_latest_obs.hasConfidenceImage = false;

    const TTimeStamp tim0 = mrpt::system::now();

    // Reset these timestamp flags so if they are !=0 in the next call we're
    // sure they're new frames.
    m_latest_obs_cs.lock();
    m_tim_latest_rgb = 0;
    m_tim_latest_depth = 0;
    m_latest_obs_cs.unlock();

    while (freenect_process_events(f_ctx) >= 0 &&
           mrpt::system::now() < (tim0 + max_wait))
    {
        // Got a new frame?
        if ((!m_grab_image ||
             m_tim_latest_rgb != 0) &&  // If we are NOT grabbing RGB or we are
            // and there's a new frame...
            (!m_grab_depth ||
             m_tim_latest_depth != 0)  // If we are NOT grabbing Depth or we are
            // and there's a new frame...
        )
        {
            // Approx: 0.5ms delay between depth frame (first) and RGB frame
            // (second).
            // cout << "m_tim_latest_rgb: " << m_tim_latest_rgb << "
            // m_tim_latest_depth: "<< m_tim_latest_depth <<endl;
            there_is_obs = true;
            break;
        }
    }

    // Handle the case when there is NOT depth frames (if there's something very
    // close blocking the IR sensor) but we have RGB:
    if ((m_grab_image && m_tim_latest_rgb != 0) &&
        (m_grab_depth && m_tim_latest_depth == 0))
    {
        // Mark the entire range data as invalid:
        m_latest_obs.hasRangeImage = true;
        m_latest_obs.range_is_depth = true;

        m_latest_obs_cs.lock();  // Important: if system is running slow, etc.
        // we cannot tell for sure that the depth
        // buffer is not beeing filled right now:
        m_latest_obs.rangeImage.setSize(
            m_cameraParamsDepth.nrows, m_cameraParamsDepth.ncols);
        m_latest_obs.rangeImage.fill(0);  // "0" means: error in range
        m_latest_obs_cs.unlock();
        there_is_obs = true;
    }

    if (!there_is_obs) return;

    // We DO have a fresh new observation:

    // Quick save the observation to the user's object:
    m_latest_obs_cs.lock();
    m_out_obs.swap(m_latest_obs);
    m_latest_obs_cs.unlock();
#endif

    // Set common data into observation:
    // --------------------------------------
    m_out_obs.sensorLabel = m_sensorLabel;
    m_out_obs.timestamp = mrpt::system::now();
    m_out_obs.sensorPose = m_sensorPoseOnRobot;
    m_out_obs.relativePoseIntensityWRTDepth = m_relativePoseIntensityWRTDepth;

    m_out_obs.cameraParams = m_cameraParamsDepth;
    m_out_obs.cameraParamsIntensity = m_cameraParamsRGB;

    // 3D point cloud:
    if (m_out_obs.hasRangeImage && m_grab_3D_points)
    {
        m_out_obs.unprojectInto(m_out_obs);

        if (!m_grab_depth)
        {
            m_out_obs.hasRangeImage = false;
            m_out_obs.rangeImage.resize(0, 0);
        }
    }

    // preview in real-time?
    if (m_preview_window)
    {
        if (m_out_obs.hasRangeImage)
        {
            if (++m_preview_decim_counter_range > m_preview_window_decimation)
            {
                m_preview_decim_counter_range = 0;
                if (!m_win_range)
                {
                    m_win_range =
                        mrpt::gui::CDisplayWindow::Create("Preview RANGE");
                    m_win_range->setPos(5, 5);
                }

                // Normalize the image
                mrpt::img::CImage img = m_out_obs.rangeImage_getAsImage();
                m_win_range->showImage(img);
            }
        }
        if (m_out_obs.hasIntensityImage)
        {
            if (++m_preview_decim_counter_rgb > m_preview_window_decimation)
            {
                m_preview_decim_counter_rgb = 0;
                if (!m_win_int)
                {
                    m_win_int =
                        mrpt::gui::CDisplayWindow::Create("Preview INTENSITY");
                    m_win_int->setPos(300, 5);
                }
                m_win_int->showImage(m_out_obs.intensityImage);
            }
        }
    }
    else
    {
        if (m_win_range) m_win_range.reset();
        if (m_win_int) m_win_int.reset();
    }
}

/* -----------------------------------------------------
                getNextObservation (with IMU)
----------------------------------------------------- */
void CKinect::getNextObservation(
    mrpt::obs::CObservation3DRangeScan& out_obs,
    mrpt::obs::CObservationIMU& out_obs_imu, bool& there_is_obs,
    bool& hardware_error)
{
    // First, try getting the RGB+Depth data:
    getNextObservation(out_obs, there_is_obs, hardware_error);

    // If successful, fill out the accelerometer data:
    if (there_is_obs && this->m_grab_IMU)
    {
        double acc_x = 0, acc_y = 0, acc_z = 0;  // In m/s^2
        bool has_good_acc = false;

#if MRPT_HAS_KINECT_FREENECT
        {
            freenect_update_tilt_state(f_dev);
            freenect_raw_tilt_state* state = freenect_get_tilt_state(f_dev);
            if (state)
            {
                has_good_acc = true;
                double lx, ly, lz;
                freenect_get_mks_accel(state, &lx, &ly, &lz);

                // Convert to a unified coordinate system:
                // +x: forward
                // +y: left
                // +z: upward
                acc_x = -lz;
                acc_y = -lx;
                acc_z = -ly;
            }
        }
#endif

        // Common part for any implementation:
        if (has_good_acc)
        {
            out_obs_imu.sensorLabel = out_obs.sensorLabel + "_IMU";
            out_obs_imu.timestamp = out_obs.timestamp;
            out_obs_imu.sensorPose = out_obs.sensorPose;

            for (auto&& i : out_obs_imu.dataIsPresent) i = false;

            out_obs_imu.dataIsPresent[IMU_X_ACC] = true;
            out_obs_imu.dataIsPresent[IMU_Y_ACC] = true;
            out_obs_imu.dataIsPresent[IMU_Z_ACC] = true;

            out_obs_imu.rawMeasurements[IMU_X_ACC] = acc_x;
            out_obs_imu.rawMeasurements[IMU_Y_ACC] = acc_y;
            out_obs_imu.rawMeasurements[IMU_Z_ACC] = acc_z;
        }
    }
}

/* -----------------------------------------------------
                setPathForExternalImages
----------------------------------------------------- */
void CKinect::setPathForExternalImages([
    [maybe_unused]] const std::string& directory)
{
    // Ignore for now. It seems performance is better grabbing everything
    // to a single big file than creating hundreds of smaller files per
    // second...
    return;

    //  if (!mrpt::system::createDirectory( directory ))
    //  {
    //      THROW_EXCEPTION_FMT("Error: Cannot create the directory for
    // externally
    // saved images: %s",directory.c_str() );
    //  }
    //  m_path_for_external_images = directory;
}

/** Change tilt angle \note Sensor must be open first. */
void CKinect::setTiltAngleDegrees([[maybe_unused]] double angle)
{
    ASSERTMSG_(isOpen(), "Sensor must be open first");

#if MRPT_HAS_KINECT_FREENECT
    freenect_set_tilt_degs(f_dev, angle);
#endif
}

double CKinect::getTiltAngleDegrees()
{
    ASSERTMSG_(isOpen(), "Sensor must be open first");

#if MRPT_KINECT_WITH_FREENECT
    freenect_update_tilt_state(f_dev);
    freenect_raw_tilt_state* ts = freenect_get_tilt_state(f_dev);
    return freenect_get_tilt_degs(ts);
#else
    return 0;
#endif
}