[mrpt-topography]

Topographic functions, geoid transformations.

Library mrpt-topography

This C++ library is part of MRPT and can be installed in Debian-based systems with:

sudo apt install libmrpt-topography-dev

Read also how to import MRPT into your CMake scripts.

Conversion and useful data structures to handle topographic data, perform geoid transformations, geocentric coordinates, etc…

See mrpt::topography

Library contents

// typedefs

typedef mrpt::math::TPoint3D mrpt::topography::TUTMCoords;
typedef mrpt::math::TPoint3D mrpt::topography::TGeocentricCoords;

// structs

struct mrpt::topography::TCoords;
struct mrpt::topography::TDatum10Params;
struct mrpt::topography::TDatum1DTransf;
struct mrpt::topography::TDatum7Params;
struct mrpt::topography::TDatum7Params_TOPCON;
struct mrpt::topography::TDatumHelmert2D;
struct mrpt::topography::TDatumHelmert2D_TOPCON;
struct mrpt::topography::TDatumHelmert3D;
struct mrpt::topography::TDatumHelmert3D_TOPCON;
struct mrpt::topography::TDatumTransfInterpolation;
struct mrpt::topography::TEllipsoid;
struct mrpt::topography::TGeodeticCoords;
struct mrpt::topography::TPathFromRTKInfo;

// global functions

bool mrpt::topography::operator == (
    const TCoords& a,
    const TCoords& o
    );

bool mrpt::topography::operator != (
    const TCoords& a,
    const TCoords& o
    );

std::ostream& mrpt::topography::operator << (
    std::ostream& out,
    const TCoords& o
    );

bool mrpt::topography::operator == (
    const TGeodeticCoords& a,
    const TGeodeticCoords& o
    );

bool mrpt::topography::operator != (
    const TGeodeticCoords& a,
    const TGeodeticCoords& o
    );

void mrpt::topography::geodeticToENU_WGS84(const TGeodeticCoords& in_coords, mrpt::math::TPoint3D& out_ENU_point, const TGeodeticCoords& in_coords_origin);

void mrpt::topography::ENUToGeocentric(
    const mrpt::math::TPoint3D& in_ENU_point,
    const TGeodeticCoords& in_coords_origin,
    TGeocentricCoords& out_coords,
    const TEllipsoid& ellip
    );

void mrpt::topography::geocentricToENU_WGS84(const mrpt::math::TPoint3D& in_geocentric_point, mrpt::math::TPoint3D& out_ENU_point, const TGeodeticCoords& in_coords_origin);

void mrpt::topography::geocentricToENU_WGS84(
    const std::vector<mrpt::math::TPoint3D>& in_geocentric_points,
    std::vector<mrpt::math::TPoint3D>& out_ENU_points,
    const TGeodeticCoords& in_coords_origin
    );

void mrpt::topography::geodeticToGeocentric_WGS84(const TGeodeticCoords& in_coords, mrpt::math::TPoint3D& out_point);
void mrpt::topography::geodeticToGeocentric(const TGeodeticCoords& in_coords, TGeocentricCoords& out_point, const TEllipsoid& ellip);
void mrpt::topography::geocentricToGeodetic(const TGeocentricCoords& in_point, TGeodeticCoords& out_coords, const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84());
void mrpt::topography::transform7params(const mrpt::math::TPoint3D& in_point, const TDatum7Params& in_datum, mrpt::math::TPoint3D& out_point);
void mrpt::topography::transform7params_TOPCON(const mrpt::math::TPoint3D& in_point, const TDatum7Params_TOPCON& in_datum, mrpt::math::TPoint3D& out_point);
void mrpt::topography::transform10params(const mrpt::math::TPoint3D& in_point, const TDatum10Params& in_datum, mrpt::math::TPoint3D& out_point);
void mrpt::topography::transformHelmert2D(const mrpt::math::TPoint2D& p, const TDatumHelmert2D& d, mrpt::math::TPoint2D& o);
void mrpt::topography::transformHelmert2D_TOPCON(const mrpt::math::TPoint2D& p, const TDatumHelmert2D_TOPCON& d, mrpt::math::TPoint2D& o);
void mrpt::topography::transformHelmert3D(const mrpt::math::TPoint3D& p, const TDatumHelmert3D& d, mrpt::math::TPoint3D& o);
void mrpt::topography::transformHelmert3D_TOPCON(const mrpt::math::TPoint3D& p, const TDatumHelmert3D_TOPCON& d, mrpt::math::TPoint3D& o);
void mrpt::topography::transform1D(const mrpt::math::TPoint3D& p, const TDatum1DTransf& d, mrpt::math::TPoint3D& o);
void mrpt::topography::transfInterpolation(const mrpt::math::TPoint3D& p, const TDatumTransfInterpolation& d, mrpt::math::TPoint3D& o);

void mrpt::topography::UTMToGeodetic(
    double X,
    double Y,
    int zone,
    char hem,
    double& out_lon,
    double& out_lat,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    );

void mrpt::topography::UTMToGeodetic(
    const TUTMCoords& UTMCoords,
    int zone,
    char hem,
    TGeodeticCoords& GeodeticCoords,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    );

void mrpt::topography::GeodeticToUTM(
    double in_latitude_degrees,
    double in_longitude_degrees,
    double& out_UTM_x,
    double& out_UTM_y,
    int& out_UTM_zone,
    char& out_UTM_latitude_band,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    );

void mrpt::topography::geodeticToUTM(
    const TGeodeticCoords& GeodeticCoords,
    TUTMCoords& UTMCoords,
    int& UTMZone,
    char& UTMLatitudeBand,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    );

void mrpt::topography::GeodeticToUTM(
    const TGeodeticCoords& GeodeticCoords,
    TUTMCoords& UTMCoords,
    int& UTMZone,
    char& UTMLatitudeBand,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    );

void mrpt::topography::ENU_axes_from_WGS84(
    double in_longitude_reference_degrees,
    double in_latitude_reference_degrees,
    double in_height_reference_meters,
    mrpt::math::TPose3D& out_ENU,
    bool only_angles = false
    );

void mrpt::topography::ENU_axes_from_WGS84(const TGeodeticCoords& in_coords, mrpt::math::TPose3D& out_ENU, bool only_angles = false);

void mrpt::topography::path_from_rtk_gps(
    mrpt::poses::CPose3DInterpolator& robot_path,
    const mrpt::obs::CRawlog& rawlog,
    size_t rawlog_first,
    size_t rawlog_last,
    bool isGUI = false,
    bool disableGPSInterp = false,
    int path_smooth_filter_size = 2,
    TPathFromRTKInfo* outInfo = nullptr
    );

void mrpt::topography::registerAllClasses_mrpt_topography();

Global Functions

void mrpt::topography::geodeticToENU_WGS84(
    const TGeodeticCoords& in_coords,
    mrpt::math::TPoint3D& out_ENU_point,
    const TGeodeticCoords& in_coords_origin
    )

Coordinates transformation from longitude/latitude/height to ENU (East-North-Up) X/Y/Z coordinates The WGS84 ellipsoid is used for the transformation.

The coordinates are in 3D relative to some user-provided point, with local X axis being east-ward, Y north-ward, Z up-ward. For an explanation, refer to http://en.wikipedia.org/wiki/Reference_ellipsoid The “Up” (Z) direction in ENU is the normal to the ellipsoid, which coincides with the direction of an increasing geodetic height.

See also:

coordinatesTransformation_WGS84_geocentric, ENU_axes_from_WGS84, ENUToGeocentric

void mrpt::topography::ENUToGeocentric(
    const mrpt::math::TPoint3D& in_ENU_point,
    const TGeodeticCoords& in_coords_origin,
    TGeocentricCoords& out_coords,
    const TEllipsoid& ellip
    )

ENU to geocentric coordinates.

See also:

geodeticToENU_WGS84

void mrpt::topography::geocentricToENU_WGS84(
    const mrpt::math::TPoint3D& in_geocentric_point,
    mrpt::math::TPoint3D& out_ENU_point,
    const TGeodeticCoords& in_coords_origin
    )

ENU to EFEC (Geocentric) coordinates.

See also:

ENUToGeocentric, geodeticToENU_WGS84

void mrpt::topography::geodeticToGeocentric_WGS84(
    const TGeodeticCoords& in_coords,
    mrpt::math::TPoint3D& out_point
    )

Coordinates transformation from longitude/latitude/height to geocentric X/Y/Z coordinates (with a WGS84 geoid).

The WGS84 ellipsoid is used for the transformation. The coordinates are in 3D where the reference is the center of the Earth. For an explanation, refer to http://en.wikipedia.org/wiki/Reference_ellipsoid

See also:

geodeticToENU_WGS84

void mrpt::topography::geodeticToGeocentric(
    const TGeodeticCoords& in_coords,
    TGeocentricCoords& out_point,
    const TEllipsoid& ellip
    )

Coordinates transformation from longitude/latitude/height to geocentric X/Y/Z coordinates (with an specified geoid).

See also:

geocentricToGeodetic

void mrpt::topography::geocentricToGeodetic(
    const TGeocentricCoords& in_point,
    TGeodeticCoords& out_coords,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    )

Coordinates transformation from geocentric X/Y/Z coordinates to longitude/latitude/height.

See also:

geodeticToGeocentric

void mrpt::topography::transform7params(
    const mrpt::math::TPoint3D& in_point,
    const TDatum7Params& in_datum,
    mrpt::math::TPoint3D& out_point
    )

7-parameter Bursa-Wolf transformation: [ X Y Z ]_WGS84 = [ dX dY dZ ] + ( 1 + dS ) [ 1 RZ -RY; -RZ 1 RX; RY -RX 1 ] [ X Y Z ]_local

See also:

transform10params

void mrpt::topography::transform7params_TOPCON(
    const mrpt::math::TPoint3D& in_point,
    const TDatum7Params_TOPCON& in_datum,
    mrpt::math::TPoint3D& out_point
    )

7-parameter Bursa-Wolf transformation TOPCON: [ X Y Z ]_WGS84 = [ dX dY dZ ] + ( 1 + dS ) [ 1 RZ -RY; -RZ 1 RX; RY -RX 1 ] [ X Y Z ]_local

See also:

transform10params

void mrpt::topography::transform10params(
    const mrpt::math::TPoint3D& in_point,
    const TDatum10Params& in_datum,
    mrpt::math::TPoint3D& out_point
    )

10-parameter Molodensky-Badekas transformation: [ X Y Z ]_WGS84 = [ dX dY dZ ] + ( 1 + dS ) [ 1 RZ -RY; -RZ 1 RX; RY -RX 1 ] [ X-Xp Y-Yp Z-Zp ]_local + [Xp Yp Zp]

See also:

transform7params

void mrpt::topography::transformHelmert2D(const mrpt::math::TPoint2D& p, const TDatumHelmert2D& d, mrpt::math::TPoint2D& o)

Helmert 2D transformation: [ X Y ]_WGS84 = [ dX dY ] + ( 1 + dS ) [ cos(alpha) -sin(alpha); sin(alpha) cos(alpha) ] [ X-Xp Y-Yp Z-Zp ]_local + [Xp Yp Zp].

See also:

transformHelmert3D

void mrpt::topography::transformHelmert2D_TOPCON(const mrpt::math::TPoint2D& p, const TDatumHelmert2D_TOPCON& d, mrpt::math::TPoint2D& o)

Helmert 2D transformation: [ X Y ]_WGS84 = [ dX dY ] + ( 1 + dS ) [ cos(alpha) -sin(alpha); sin(alpha) cos(alpha) ] [ X-Xp Y-Yp Z-Zp ]_local + [Xp Yp Zp].

See also:

transformHelmert3D

void mrpt::topography::transformHelmert3D(const mrpt::math::TPoint3D& p, const TDatumHelmert3D& d, mrpt::math::TPoint3D& o)

Helmert3D transformation: [ X Y Z ]_WGS84 = [ dX dY dZ ] + ( 1 + dS ) [ 1 -RZ RY; RZ 1 -RX; -RY RX 1 ] [ X Y Z ]_local.

Helmert 3D transformation: [ X Y ]_WGS84 = [ dX dY ] + ( 1 + dS ) [ cos(alpha) -sin(alpha); sin(alpha) cos(alpha) ] [ X-Xp Y-Yp Z-Zp ]_local + [Xp Yp Zp].

See also:

transformHelmert2D

transformHelmert3D

void mrpt::topography::transformHelmert3D_TOPCON(const mrpt::math::TPoint3D& p, const TDatumHelmert3D_TOPCON& d, mrpt::math::TPoint3D& o)

Helmert 3D transformation: [ X Y ]_WGS84 = [ dX dY ] + ( 1 + dS ) [ cos(alpha) -sin(alpha); sin(alpha) cos(alpha) ] [ X-Xp Y-Yp Z-Zp ]_local + [Xp Yp Zp].

See also:

transformHelmert3D

void mrpt::topography::transform1D(const mrpt::math::TPoint3D& p, const TDatum1DTransf& d, mrpt::math::TPoint3D& o)

1D transformation: [ Z ]_WGS84 = (dy * X - dx * Y + Z)*(1+e)+DZ

See also:

transformHelmert3D

void mrpt::topography::transfInterpolation(const mrpt::math::TPoint3D& p, const TDatumTransfInterpolation& d, mrpt::math::TPoint3D& o)

Interpolation: [ Z ]_WGS84 = (dy * X - dx * Y + Z)*(1+e)+DZ.

1D transformation: [ X;Y ]_WGS84 = [X;Y]_locales+[1 -sin(d.beta);0 cos(d.beta)]*[x*d.dSx;y*d.dSy ]

See also:

transformHelmert3D

void mrpt::topography::UTMToGeodetic(
    double X,
    double Y,
    int zone,
    char hem,
    double& out_lon,
    double& out_lat,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    )

Returns the Geodetic coordinates of the UTM input point.

Parameters:

X	East coordinate of the input point.
Y	North coordinate of the input point.
zone	time zone (Spanish: “huso”).
hem	hemisphere (‘N’/’n’ for North or ‘S’/s’ for South ). An exception will be raised on any other value.
ellip	the reference ellipsoid used for the transformation (default: WGS84)
out_lat	Out latitude, in degrees.
out_lon	Out longitude, in degrees.

void mrpt::topography::UTMToGeodetic(
    const TUTMCoords& UTMCoords,
    int zone,
    char hem,
    TGeodeticCoords& GeodeticCoords,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    )

Returns the Geodetic coordinates of the UTM input point.

Parameters:

UTMCoords	UTM input coordinates.
zone	time zone (Spanish: “huso”).
hem	hemisphere (‘N’/’n’ for North or ‘S’/s’ for South ). An exception will be raised on any other value.
GeodeticCoords	Out geodetic coordinates.
ellip	the reference ellipsoid used for the transformation (default: WGS84)

void mrpt::topography::GeodeticToUTM(
    double in_latitude_degrees,
    double in_longitude_degrees,
    double& out_UTM_x,
    double& out_UTM_y,
    int& out_UTM_zone,
    char& out_UTM_latitude_band,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    )

Convert latitude and longitude coordinates into UTM coordinates, computing the corresponding UTM zone and latitude band.

This method is based on public code by Gabriel Ruiz Martinez and Rafael Palacios. Example:

Input:
 Lat=40.3154333    Lon=-3.4857166
Output:
 x = 458731
 y = 4462881
 utm_zone = 30
 utm_band = T

See also:

http://www.mathworks.com/matlabcentral/fileexchange/10915

void mrpt::topography::GeodeticToUTM(
    const TGeodeticCoords& GeodeticCoords,
    TUTMCoords& UTMCoords,
    int& UTMZone,
    char& UTMLatitudeBand,
    const TEllipsoid& ellip = TEllipsoid::Ellipsoid_WGS84()
    )

Convert latitude and longitude coordinates into UTM coordinates, computing the corresponding UTM zone and latitude band.

This method is based on public code by Gabriel Ruiz Martinez and Rafael Palacios. Example:

Input:
 Lat=40.3154333    Lon=-3.4857166
Output:
 x = 458731
 y = 4462881
 utm_zone = 30
 utm_band = T

See also:

http://www.mathworks.com/matlabcentral/fileexchange/10915

void mrpt::topography::ENU_axes_from_WGS84(
    double in_longitude_reference_degrees,
    double in_latitude_reference_degrees,
    double in_height_reference_meters,
    mrpt::math::TPose3D& out_ENU,
    bool only_angles = false
    )

Returns the East-North-Up (ENU) coordinate system associated to the given point.

This is the reference employed in geodeticToENU_WGS84 The “Up” (Z) direction in ENU is the normal to the ellipsoid, which coincides with the direction of an increasing geodetic height.

Parameters:

only_angles

If set to true, the (x,y,z) fields will be left zeroed.

See also:

geodeticToENU_WGS84

void mrpt::topography::ENU_axes_from_WGS84(
    const TGeodeticCoords& in_coords,
    mrpt::math::TPose3D& out_ENU,
    bool only_angles = false
    )

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

void mrpt::topography::path_from_rtk_gps(
    mrpt::poses::CPose3DInterpolator& robot_path,
    const mrpt::obs::CRawlog& rawlog,
    size_t rawlog_first,
    size_t rawlog_last,
    bool isGUI = false,
    bool disableGPSInterp = false,
    int path_smooth_filter_size = 2,
    TPathFromRTKInfo* outInfo = nullptr
    )

Reconstruct the path of a vehicle equipped with 3 RTK GPSs.

For more details on the method, refer to the paper: (…)

Parameters:

robot_path	[OUT] The reconstructed vehicle path
rawlog	[IN] The dataset. It must contain mrpt::obs::CObservationGPS observations with GGA datums.
rawlog_first	[IN] The index of the first entry to process (first=0)
rawlog_last	[IN] The index of the last entry to process
isGUI	[IN] If set to true, some progress dialogs will be shown during the computation (requires MRPT built with support for wxWidgets).
disableGPSInterp	[IN] Whether to interpolate missing GPS readings between very close datums.
path_smooth_filter_size	[IN] Size of the window in the pitch & roll noise filtering.
outInfo	[OUT] Optional output: additional information from the optimization

See also:

mrpt::topography

void mrpt::topography::registerAllClasses_mrpt_topography()

Forces manual RTTI registration of all serializable classes in this namespace.

Should never be required to be explicitly called by users, except if building MRPT as a static library.