COpenNI2_RGBD360.h

Go to the documentation of this file.

/* +------------------------------------------------------------------------+
   |                     Mobile Robot Programming Toolkit (MRPT)            |
   |                          https://www.mrpt.org/                         |
   |                                                                        |
   | Copyright (c) 2005-2020, Individual contributors, see AUTHORS file     |
   | See: https://www.mrpt.org/Authors - All rights reserved.               |
   | Released under BSD License. See: https://www.mrpt.org/License          |
   +------------------------------------------------------------------------+ */
#pragma once

#include <mrpt/gui/CDisplayWindow.h>
#include <mrpt/hwdrivers/CGenericSensor.h>
#include <mrpt/hwdrivers/COpenNI2Generic.h>
#include <mrpt/obs/CObservationRGBD360.h>
#include <mrpt/typemeta/TEnumType.h>

namespace mrpt::hwdrivers
{
/** A class for grabing RGBD images from several OpenNI2 sensors. This is used
 *to obtain larger fields of view using a radial configuration of the sensors.
 * The same options (resolution, fps, etc.) are used for every sensor.
 *
 *  <h2>Configuration and usage:</h2> <hr>
 * Data is returned as observations of type mrpt::obs::CObservationRGBD360.
 *  See those classes for documentation on their fields.
 *
 * As with any other CGenericSensor class, the normal sequence of methods to be
 *called is:
 *   - CGenericSensor::loadConfig() - Or calls to the individual setXXX() to
 *configure the sensor parameters.
 *   - COpenNI2_RGBD360::initialize() - to start the communication with the
 *sensor.
 *   - call COpenNI2_RGBD360::getNextObservation() for getting the data.
 *
 * <h2>Calibration parameters</h2><hr>
 *   The reference system for both depth and RGB images provided by each
 *individual OpenNI2 sensors are referred to the
 *   RGB Camera.
 *   The extrinsic parameters of each RGBD sensor are provided from a
 *configuration file. This calibration was obtained
 *   using the method reported in [].
 *
 * <h2>Coordinates convention</h2><hr>
 *   The origin of coordinates is the focal point of the RGB camera of the
 *first indexed sensor, with the axes oriented
 *   as in the diagram shown in mrpt::obs::CObservation3DRangeScan. Notice in
 *that picture that the RGB camera is
 *   assumed to have axes as usual in computer vision, which differ from those
 *for the depth camera.
 *
 *   The X,Y,Z axes used to report the data from accelerometers coincide with
 *those of the depth camera
 *    (e.g. the camera standing on a table would have an ACC_Z=-9.8m/s2).
 *
 *   Notice however that, for consistency with stereo cameras, when loading the
 *calibration parameters from
 *    a configuration file, the left-to-right pose increment is expected as if
 *both RGB & IR cameras had
 *    their +Z axes pointing forward, +X to the right, +Y downwards (just like
 *it's the standard in stereo cameras
 *    and in computer vision literature). In other words: the pose stored in
 *this class uses a different
 *    axes convention for the depth camera than in a stereo camera, so when a
 *pose L2R is loaded from a calibration file
 *    it's actually converted like:
 *
 *      L2R(this class convention) = CPose3D(0,0,0,-90deg,0deg,-90deg) (+)
 *L2R(in the config file)
 *
 *
 * <h2>Some general comments</h2><hr>
 *      - Depth is grabbed in 10bit depth, and a range N it's converted to
 *meters
 *as: range(m) = 0.1236 * tan(N/2842.5 + 1.1863)
 *      - This sensor can be also used from within rawlog-grabber to grab
 *datasets
 *within a robot with more sensors.
 *      - There is no built-in threading support, so if you use this class
 *manually
 *(not with-in rawlog-grabber),
 *          the ideal would be to create a thread and continuously request data
 *from
 *that thread (see mrpt::system::createThread ).
 *      - The intensity channel default to the RGB images, but it can be changed
 *with setVideoChannel() to read the IR camera images (useful for calibrating).
 *      - There is a built-in support for an optional preview of the data on a
 *window, so you don't need to even worry on creating a window to show them.
 *      - This class relies on an embedded version of libfreenect (you do NOT
 *need
 *to install it in your system). Thanks guys for the great job!
 *
 * <h2>Converting to 3D point cloud </h2><hr>
 *   You can convert the 3D observation into a 3D point cloud with this piece
 *of code:
 *
 * \code
 * mrpt::obs::CObservationRGBD360      obs3D;
 * mrpt::maps::CColouredPointsMap       pntsMap;
 * pntsMap.colorScheme.scheme = CColouredPointsMap::cmFromIntensityImage;
 * pntsMap.loadFromRangeScan(obs3D);
 * \endcode
 *
 *   Then the point cloud mrpt::maps::CColouredPointsMap can be converted into
 *an OpenGL object for
 *    rendering with mrpt::maps::CMetricMap::getAs3DObject() or alternatively
 *with:
 *
 *  \code
 *    mrpt::opengl::CPointCloudColoured::Ptr gl_points =
 *mrpt::opengl::CPointCloudColoured::Create();
 *    gl_points->loadFromPointsMap(&pntsMap);
 *  \endcode
 *
 *
 * <h2>Platform-specific comments</h2><hr>
 *   For more details, refer to <a href="http://openkinect.org/wiki/Main_Page"
 *>libfreenect</a> documentation:
 *      - Linux: You'll need root privileges to access Kinect. Or, install
 *<code>
 *MRPT/scripts/51-kinect.rules </code> in <code>/etc/udev/rules.d/</code> to
 *allow access to all users.
 *      - Windows:
 *          - Since MRPT 0.9.4 you'll only need to install <a
 *href="http://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/"
 *>libusb-win32</a>: download and extract the latest
 *libusb-win32-bin-x.x.x.x.zip
 *          - To install the drivers, read this:
 *http://openkinect.org/wiki/Getting_Started#Windows
 *      - MacOS: (write me!)
 *
 *
 * <h2>Format of parameters for loading from a .ini file</h2><hr>
 *
 *  \code
 *  PARAMETERS IN THE ".INI"-LIKE CONFIGURATION STRINGS:
 * -------------------------------------------------------
 *   [supplied_section_name]
 *    sensorLabel     = RGBD360       // A text description
 *    preview_window  = false        // Show a window with a preview of the
 *grabbed data in real-time
 *
 *    device_number   = 0           // Device index to open (0:first Kinect,
 *1:second Kinect,...)
 *
 *    grab_image      = true        // Grab the RGB image channel?
 *(Default=true)
 *    grab_depth      = true        // Grab the depth channel? (Default=true)
 *    grab_3D_points  = true        // Grab the 3D point cloud? (Default=true)
 *If disabled, points can be generated later on.
 *
 *    video_channel   = VIDEO_CHANNEL_RGB // Optional. Can be:
 *VIDEO_CHANNEL_RGB (default) or VIDEO_CHANNEL_IR
 *
 *    pose_x=0  // Camera position in the robot (meters)
 *    pose_y=0
 *    pose_z=0
 *    pose_yaw=0    // Angles in degrees
 *    pose_pitch=0
 *    pose_roll=0
 *
 *
 *    // Left/Depth camera
 *    [supplied_section_name_LEFT]
 *    rawlog-grabber-ignore = true // Instructs rawlog-grabber to ignore this
 *section (it is not a separate device!)
 *
 *    resolution = [640 488]
 *    cx         = 314.649173
 *    cy         = 240.160459
 *    fx         = 572.882768
 *    fy         = 542.739980
 *    dist       = [-4.747169e-03 -4.357976e-03 0.000000e+00 0.000000e+00
 *0.000000e+00]    // The order is: [K1 K2 T1 T2 K3]
 *
 *    // Right/RGB camera
 *    [supplied_section_name_RIGHT]
 *    rawlog-grabber-ignore = true // Instructs rawlog-grabber to ignore this
 *section (it is not a separate device!)
 *
 *    resolution = [640 480]
 *    cx         = 322.515987
 *    cy         = 259.055966
 *    fx         = 521.179233
 *    fy         = 493.033034
 *    dist       = [5.858325e-02 3.856792e-02 0.000000e+00 0.000000e+00
 *0.000000e+00]    // The order is: [K1 K2 T1 T2 K3]
 *
 *    // Relative pose of the right camera wrt to the left camera:
 *    // This assumes that both camera frames are such that +Z points
 *    // forwards, and +X and +Y to the right and downwards.
 *    // For the actual coordinates employed in 3D observations, see figure in
 *mrpt::obs::CObservation3DRangeScan
 *    [supplied_section_name_LEFT2RIGHT_POSE]
 *    rawlog-grabber-ignore = true // Instructs rawlog-grabber to ignore this
 *section (it is not a separate device!)
 *
 *    pose_quaternion      = [0.025575 -0.000609 -0.001462 0.999987 0.002038
 *0.004335 -0.001693]
 *
 *  \endcode
 *
 *  More references to read:
 *      - http://RGBD360
 *      - http://http://www.openni.org/
 * \ingroup mrpt_hwdrivers_grp
 */
class COpenNI2_RGBD360 : public mrpt::hwdrivers::CGenericSensor,
                         public mrpt::hwdrivers::COpenNI2Generic
{
    DEFINE_GENERIC_SENSOR(COpenNI2_RGBD360)

   public:
    /** Default ctor
     */
    COpenNI2_RGBD360();
    /** Default ctor
     */
    ~COpenNI2_RGBD360() override;

    /** Initializes the 3D camera - should be invoked after calling loadConfig()
     * or setting the different parameters with the set*() methods.
     *  \exception This method must throw an exception with a descriptive
     * message if some critical error is found.
     */
    void initialize() override;

    /** To be called  at a high rate (>XX Hz), this method populates the
     * internal buffer of received observations.
     *  This method is mainly intended for usage within rawlog-grabber or
     * similar programs.
     *  For an alternative, see getNextObservation()
     *  \exception This method must throw an exception with a descriptive
     * message if some critical error is found.
     * \sa getNextObservation
     */
    void doProcess() override;

    /** The main data retrieving function, to be called after calling
     * loadConfig() and initialize().
     *  \param out_obs The output retrieved observation (only if
     * there_is_obs=true).
     *  \param there_is_obs If set to false, there was no new observation.
     *  \param hardware_error True on hardware/comms error.
     *
     * \sa doProcess
     */
    void getNextObservation(
        mrpt::obs::CObservationRGBD360& out_obs, bool& there_is_obs,
        bool& hardware_error);

    /**  Set the path where to save off-rawlog image files (this class DOES take
     * into account this path).
     *  An  empty string (the default value at construction) means to save
     * images embedded in the rawlog, instead of on separate files.
     * \exception std::exception If the directory doesn't exists and cannot be
     * created.
     */
    void setPathForExternalImages(const std::string& directory) override;

    /** @name Sensor parameters (alternative to \a loadConfig ) and manual
       control
        @{ */

    /** Get the maximum range (meters) that can be read in the observation field
     * "rangeImage" */
    inline double getMaxRange() const { return m_maxRange; }
    /** Enable/disable the grabbing of the RGB channel */
    inline void enableGrabRGB(bool enable = true) { m_grab_rgb = enable; }
    inline bool isGrabRGBEnabled() const { return m_grab_rgb; }
    /** Enable/disable the grabbing of the depth channel */
    inline void enableGrabDepth(bool enable = true) { m_grab_depth = enable; }
    inline bool isGrabDepthEnabled() const { return m_grab_depth; }
    /** Enable/disable the grabbing of the 3D point clouds */
    inline void enableGrab3DPoints(bool enable = true)
    {
        m_grab_3D_points = enable;
    }
    inline bool isGrab3DPointsEnabled() const { return m_grab_3D_points; }
    /** @} */

   protected:
    void loadConfig_sensorSpecific(
        const mrpt::config::CConfigFileBase& configSource,
        const std::string& section) override;

    mrpt::poses::CPose3D m_sensorPoseOnRobot;

    static const int NUM_SENSORS = 2;

    /** Show preview window while grabbing
     */
    bool m_preview_window{false};
    /** If preview is enabled, only show 1 out of N images.
     */
    size_t m_preview_window_decimation{1};
    size_t m_preview_decim_counter_range{0}, m_preview_decim_counter_rgb{0};
    mrpt::gui::CDisplayWindow::Ptr m_win_range[NUM_SENSORS],
        m_win_int[NUM_SENSORS];

    /** Sensor max range (meters)
     */
    double m_maxRange;

    /** Default: all true
     */
    bool m_grab_rgb{true}, m_grab_depth{true}, m_grab_3D_points{true};

};  // End of class
}  // namespace mrpt::hwdrivers