= {
Declares a class derived from "CObservation" that encapsules an image from a camera, whose relative pose to robot is also stored.
This represents a measurement of the batteries on the robot.
Declares a class derived from "CObservation" that encapsules an omnidirectional RGBD measurement from...
Declares a class derived from "CObservation" that encapsules a single range measurement, and associated parameters.
A CObservation-derived class for RAW DATA (and optionally, point cloud) of scans from 3D Velodyne LID...
This class stores a message from a CAN BUS with the protocol J1939.
Declares a class derived from "CObservation" that encapsules a 3D range scan measurement, as from a time-of-flight range camera or any other RGBD sensor.
Declares a class derived from "CObservation" that represents one (or more) range measurements to labe...
Declares a class derived from "CObservation" that encapsules a single short-range reflectivity measur...
This class stores measurements from an Inertial Measurement Unit (IMU) (attitude estimation, raw gyroscope and accelerometer values), altimeters or magnetometers.
Represents a probabilistic 3D (6D) movement.
Represents a probabilistic 2D movement of the robot mobile base.
#define CLASS_ID(T)
Access to runtime class ID for a defined class name.
Observation class for either a pair of left+right or left+disparity images from a stereo camera...
Declares a class derived from "CObservation" that represents a set of readings from gas sensors...
Store raw data from a Data Acquisition (DAQ) device, such that input or output analog and digital cha...
This represents a measurement of the wireless strength perceived by the robot.
A "CObservation"-derived class that represents a 2D range scan measurement (typically from a laser sc...
An observation of one or more "features" or "objects", possibly identified with a unique ID...
This observation represents a number of range-bearing value pairs, each one for a detected landmark...
This represents one or more RFID tags observed by a receiver.
An observation of the current (cumulative) odometry for a wheeled robot.
This class stores messages from GNSS or GNSS+IMU devices, from consumer-grade inexpensive GPS receive...