MRPT  1.9.9
mrpt::obs::CObservationBearingRange Class Reference

Detailed Description

This observation represents a number of range-bearing value pairs, each one for a detected landmark, which optionally can have identification IDs.

This class can manage sensors that detect landmarks in a 2D plane (e.g. a laser scanner) or in the 3D space (e.g. a camera). There are two direction angles: yaw (azimuth) and pitch (negative elevation). For 2D sensors, the pitch must be always set to 0. See CObservationBearingRange::validCovariances for the instructions to fill the uncertainty covariances.

See also
CObservation

Definition at line 28 of file CObservationBearingRange.h.

#include <mrpt/obs/CObservationBearingRange.h>

Inheritance diagram for mrpt::obs::CObservationBearingRange:

Classes

struct  TMeasurement
 Each one of the measurements: More...
 

Public Types

using TMeasurementList = std::vector< TMeasurement >
 

Public Member Functions

 CObservationBearingRange ()
 Default constructor. More...
 
void debugPrintOut ()
 Prints out the contents of the object. More...
 
void getSensorPose (mrpt::poses::CPose3D &out_sensorPose) const override
 A general method to retrieve the sensor pose on the robot. More...
 
void setSensorPose (const mrpt::poses::CPose3D &newSensorPose) override
 A general method to change the sensor pose on the robot. More...
 
void getDescriptionAsText (std::ostream &o) const override
 Build a detailed, multi-line textual description of the observation contents and dump it to the output stream. More...
 
template<class METRICMAP >
bool insertObservationInto (METRICMAP *theMap, const mrpt::poses::CPose3D *robotPose=nullptr) const
 This method is equivalent to: More...
 
void getSensorPose (mrpt::math::TPose3D &out_sensorPose) const
 A general method to retrieve the sensor pose on the robot. More...
 
void setSensorPose (const mrpt::math::TPose3D &newSensorPose)
 A general method to change the sensor pose on the robot. More...
 
virtual mxArraywriteToMatlab () const
 Introduces a pure virtual method responsible for writing to a mxArray Matlab object, typically a MATLAB struct whose contents are documented in each derived class. More...
 
Delayed-load manual control methods.
virtual void load () const
 Makes sure all images and other fields which may be externally stored are loaded in memory. More...
 
virtual void unload ()
 Unload all images, for the case they being delayed-load images stored in external files (othewise, has no effect). More...
 
RTTI classes and functions for polymorphic hierarchies
mrpt::rtti::CObject::Ptr duplicateGetSmartPtr () const
 Makes a deep copy of the object and returns a smart pointer to it. More...
 

Public Attributes

float minSensorDistance {0}
 
float maxSensorDistance {0}
 
float fieldOfView_yaw
 Information about the. More...
 
float fieldOfView_pitch
 Information about the sensor: The "field-of-view" of the sensor, in radians (for pitch ). More...
 
mrpt::poses::CPose3D sensorLocationOnRobot
 The position of the sensor on the robot. More...
 
TMeasurementList sensedData
 The list of observed ranges: More...
 
bool validCovariances {false}
 True: The individual 3x3 covariance matrices must be taken into account, false (default): All the measurements have identical, diagonal 3x3 covariance matrices given by the values sensor_std_range,sensor_std_yaw,sensor_std_pitch. More...
 
float sensor_std_range {0}
 Taken into account only if validCovariances=false: the standard deviation of the sensor noise model for range,yaw and pitch (in meters and radians). More...
 
float sensor_std_yaw {0}
 
float sensor_std_pitch {0}
 

Protected Member Functions

void swap (CObservation &o)
 Swap with another observation, ONLY the data defined here in the base class CObservation. More...
 
CSerializable virtual methods
uint8_t serializeGetVersion () const override
 Must return the current versioning number of the object. More...
 
void serializeTo (mrpt::serialization::CArchive &out) const override
 Pure virtual method for writing (serializing) to an abstract archive. More...
 
void serializeFrom (mrpt::serialization::CArchive &in, uint8_t serial_version) override
 Pure virtual method for reading (deserializing) from an abstract archive. More...
 
CSerializable virtual methods
virtual void serializeTo (CSchemeArchiveBase &out) const
 Virtual method for writing (serializing) to an abstract schema based archive. More...
 
virtual void serializeFrom (CSchemeArchiveBase &in)
 Virtual method for reading (deserializing) from an abstract schema based archive. More...
 

Data common to any observation

mrpt::system::TTimeStamp timestamp {mrpt::system::now()}
 The associated UTC time-stamp. More...
 
std::string sensorLabel
 An arbitrary label that can be used to identify the sensor. More...
 
mrpt::system::TTimeStamp getTimeStamp () const
 Returns CObservation::timestamp for all kind of observations. More...
 
virtual mrpt::system::TTimeStamp getOriginalReceivedTimeStamp () const
 By default, returns CObservation::timestamp but in sensors capable of satellite (or otherwise) accurate UTC timing of readings, this contains the computer-based timestamp of reception, which may be slightly different than timestamp. More...
 

RTTI stuff

using Ptr = std::shared_ptr< CObservationBearingRange >
 
using ConstPtr = std::shared_ptr< const CObservationBearingRange >
 
using UniquePtr = std::unique_ptr< CObservationBearingRange >
 
using ConstUniquePtr = std::unique_ptr< const CObservationBearingRange >
 
static mrpt::rtti::CLASSINIT _init_CObservationBearingRange
 
static const mrpt::rtti::TRuntimeClassId runtimeClassId
 
static constexpr const char * className = "CObservationBearingRange"
 
static const mrpt::rtti::TRuntimeClassId_GetBaseClass ()
 
static constexpr auto getClassName ()
 
static const mrpt::rtti::TRuntimeClassIdGetRuntimeClassIdStatic ()
 
static std::shared_ptr< CObjectCreateObject ()
 
template<typename... Args>
static Ptr Create (Args &&... args)
 
template<typename Alloc , typename... Args>
static Ptr CreateAlloc (const Alloc &alloc, Args &&... args)
 
template<typename... Args>
static UniquePtr CreateUnique (Args &&... args)
 
virtual const mrpt::rtti::TRuntimeClassIdGetRuntimeClass () const override
 Returns information about the class of an object in runtime. More...
 
virtual mrpt::rtti::CObjectclone () const override
 Returns a deep copy (clone) of the object, indepently of its class. More...
 

Member Typedef Documentation

◆ ConstPtr

◆ ConstUniquePtr

◆ Ptr

A type for the associated smart pointer

Definition at line 30 of file CObservationBearingRange.h.

◆ TMeasurementList

◆ UniquePtr

Constructor & Destructor Documentation

◆ CObservationBearingRange()

CObservationBearingRange::CObservationBearingRange ( )

Default constructor.

Definition at line 29 of file CObservationBearingRange.cpp.

Member Function Documentation

◆ _GetBaseClass()

static const mrpt::rtti::TRuntimeClassId* mrpt::obs::CObservationBearingRange::_GetBaseClass ( )
staticprotected

◆ clone()

virtual mrpt::rtti::CObject* mrpt::obs::CObservationBearingRange::clone ( ) const
overridevirtual

Returns a deep copy (clone) of the object, indepently of its class.

Implements mrpt::rtti::CObject.

◆ Create()

template<typename... Args>
static Ptr mrpt::obs::CObservationBearingRange::Create ( Args &&...  args)
inlinestatic

Definition at line 30 of file CObservationBearingRange.h.

◆ CreateAlloc()

template<typename Alloc , typename... Args>
static Ptr mrpt::obs::CObservationBearingRange::CreateAlloc ( const Alloc &  alloc,
Args &&...  args 
)
inlinestatic

Definition at line 30 of file CObservationBearingRange.h.

◆ CreateObject()

static std::shared_ptr<CObject> mrpt::obs::CObservationBearingRange::CreateObject ( )
static

◆ CreateUnique()

template<typename... Args>
static UniquePtr mrpt::obs::CObservationBearingRange::CreateUnique ( Args &&...  args)
inlinestatic

Definition at line 30 of file CObservationBearingRange.h.

◆ debugPrintOut()

void CObservationBearingRange::debugPrintOut ( )

Prints out the contents of the object.

Definition at line 153 of file CObservationBearingRange.cpp.

References mrpt::obs::gnss::pitch, and mrpt::RAD2DEG().

Here is the call graph for this function:

◆ duplicateGetSmartPtr()

mrpt::rtti::CObject::Ptr CObject::duplicateGetSmartPtr ( ) const
inlineinherited

Makes a deep copy of the object and returns a smart pointer to it.

Definition at line 200 of file CObject.h.

References mrpt::rtti::CObject::clone().

Referenced by mrpt::obs::CRawlog::addActions(), and mrpt::obs::CRawlog::addObservations().

Here is the call graph for this function:
Here is the caller graph for this function:

◆ getClassName()

static constexpr auto mrpt::obs::CObservationBearingRange::getClassName ( )
inlinestatic

Definition at line 30 of file CObservationBearingRange.h.

◆ getDescriptionAsText()

void CObservationBearingRange::getDescriptionAsText ( std::ostream &  o) const
overridevirtual

Build a detailed, multi-line textual description of the observation contents and dump it to the output stream.

Note
If overried by derived classes, call base CObservation::getDescriptionAsText() first to show common information.
This is the text that appears in RawLogViewer when selecting an object in the dataset

Reimplemented from mrpt::obs::CObservation.

Definition at line 175 of file CObservationBearingRange.cpp.

References mrpt::format(), mrpt::obs::CObservation::getDescriptionAsText(), INVALID_LANDMARK_ID, mrpt::RAD2DEG(), and mrpt::math::wrapToPi().

Here is the call graph for this function:

◆ getOriginalReceivedTimeStamp()

virtual mrpt::system::TTimeStamp mrpt::obs::CObservation::getOriginalReceivedTimeStamp ( ) const
inlinevirtualinherited

By default, returns CObservation::timestamp but in sensors capable of satellite (or otherwise) accurate UTC timing of readings, this contains the computer-based timestamp of reception, which may be slightly different than timestamp.

See also
getTimeStamp()

Reimplemented in mrpt::obs::CObservationGPS, and mrpt::obs::CObservationVelodyneScan.

Definition at line 71 of file CObservation.h.

References mrpt::obs::CObservation::timestamp.

◆ GetRuntimeClass()

virtual const mrpt::rtti::TRuntimeClassId* mrpt::obs::CObservationBearingRange::GetRuntimeClass ( ) const
overridevirtual

Returns information about the class of an object in runtime.

Reimplemented from mrpt::obs::CObservation.

◆ GetRuntimeClassIdStatic()

static const mrpt::rtti::TRuntimeClassId& mrpt::obs::CObservationBearingRange::GetRuntimeClassIdStatic ( )
static

◆ getSensorPose() [1/2]

void mrpt::obs::CObservationBearingRange::getSensorPose ( mrpt::poses::CPose3D out_sensorPose) const
inlineoverridevirtual

A general method to retrieve the sensor pose on the robot.

Note that most sensors will return a full (6D) CPose3D, but see the derived classes for more details or special cases.

See also
setSensorPose

Implements mrpt::obs::CObservation.

Definition at line 100 of file CObservationBearingRange.h.

References sensorLocationOnRobot.

◆ getSensorPose() [2/2]

void CObservation::getSensorPose ( mrpt::math::TPose3D out_sensorPose) const
inherited

A general method to retrieve the sensor pose on the robot.

Note that most sensors will return a full (6D) CPose3D, but see the derived classes for more details or special cases.

See also
setSensorPose

Definition at line 25 of file CObservation.cpp.

◆ getTimeStamp()

mrpt::system::TTimeStamp mrpt::obs::CObservation::getTimeStamp ( ) const
inlineinherited

Returns CObservation::timestamp for all kind of observations.

See also
getOriginalReceivedTimeStamp()

Definition at line 66 of file CObservation.h.

References mrpt::obs::CObservation::timestamp.

◆ insertObservationInto()

template<class METRICMAP >
bool mrpt::obs::CObservation::insertObservationInto ( METRICMAP *  theMap,
const mrpt::poses::CPose3D robotPose = nullptr 
) const
inlineinherited

This method is equivalent to:

map->insertObservation(this, robotPose)
Parameters
theMapThe map where this observation is to be inserted: the map will be updated.
robotPoseThe pose of the robot base for this observation, relative to the target metric map. Set to nullptr (default) to use (0,0,0deg)
Returns
Returns true if the map has been updated, or false if this observations has nothing to do with a metric map (for example, a sound observation).

See: Maps and observations compatibility matrix

See also
CMetricMap, CMetricMap::insertObservation

Definition at line 99 of file CObservation.h.

◆ load()

virtual void mrpt::obs::CObservation::load ( ) const
inlinevirtualinherited

Makes sure all images and other fields which may be externally stored are loaded in memory.

Note that for all CImages, calling load() is not required since the images will be automatically loaded upon first access, so load() shouldn't be needed to be called in normal cases by the user. If all the data were alredy loaded or this object has no externally stored data fields, calling this method has no effects.

See also
unload

Reimplemented in mrpt::obs::CObservation3DRangeScan, and mrpt::obs::CObservationPointCloud.

Definition at line 154 of file CObservation.h.

Referenced by mrpt::maps::COctoMapBase< octomap::OcTree, octomap::OcTreeNode >::internal_build_PointCloud_for_observation().

Here is the caller graph for this function:

◆ serializeFrom() [1/2]

void CObservationBearingRange::serializeFrom ( mrpt::serialization::CArchive in,
uint8_t  serial_version 
)
overrideprotectedvirtual

Pure virtual method for reading (deserializing) from an abstract archive.

Users don't call this method directly. Instead, use stream >> object;.

Parameters
inThe input binary stream where the object data must read from.
versionThe version of the object stored in the stream: use this version number in your code to know how to read the incoming data.
Exceptions
std::exceptionOn any I/O error

Implements mrpt::serialization::CSerializable.

Definition at line 74 of file CObservationBearingRange.cpp.

References INVALID_LANDMARK_ID, INVALID_TIMESTAMP, MRPT_THROW_UNKNOWN_SERIALIZATION_VERSION, and THROW_EXCEPTION_FMT.

◆ serializeFrom() [2/2]

virtual void mrpt::serialization::CSerializable::serializeFrom ( CSchemeArchiveBase in)
inlineprotectedvirtualinherited

Virtual method for reading (deserializing) from an abstract schema based archive.

Definition at line 74 of file CSerializable.h.

References mrpt::serialization::CSerializable::GetRuntimeClass(), and THROW_EXCEPTION.

Here is the call graph for this function:

◆ serializeGetVersion()

uint8_t CObservationBearingRange::serializeGetVersion ( ) const
overrideprotectedvirtual

Must return the current versioning number of the object.

Start in zero for new classes, and increments each time there is a change in the stored format.

Implements mrpt::serialization::CSerializable.

Definition at line 38 of file CObservationBearingRange.cpp.

◆ serializeTo() [1/2]

void CObservationBearingRange::serializeTo ( mrpt::serialization::CArchive out) const
overrideprotectedvirtual

Pure virtual method for writing (serializing) to an abstract archive.

Users don't call this method directly. Instead, use stream << object;.

Exceptions
std::exceptionOn any I/O error

Implements mrpt::serialization::CSerializable.

Definition at line 39 of file CObservationBearingRange.cpp.

References INVALID_LANDMARK_ID, and THROW_EXCEPTION_FMT.

◆ serializeTo() [2/2]

virtual void mrpt::serialization::CSerializable::serializeTo ( CSchemeArchiveBase out) const
inlineprotectedvirtualinherited

Virtual method for writing (serializing) to an abstract schema based archive.

Definition at line 64 of file CSerializable.h.

References mrpt::serialization::CSerializable::GetRuntimeClass(), and THROW_EXCEPTION.

Here is the call graph for this function:

◆ setSensorPose() [1/2]

void mrpt::obs::CObservationBearingRange::setSensorPose ( const mrpt::poses::CPose3D newSensorPose)
inlineoverridevirtual

A general method to change the sensor pose on the robot.

Note that most sensors will use the full (6D) CPose3D, but see the derived classes for more details or special cases.

See also
getSensorPose

Implements mrpt::obs::CObservation.

Definition at line 104 of file CObservationBearingRange.h.

References sensorLocationOnRobot.

Referenced by mrpt::vision::StereoObs2BRObs().

Here is the caller graph for this function:

◆ setSensorPose() [2/2]

void CObservation::setSensorPose ( const mrpt::math::TPose3D newSensorPose)
inherited

A general method to change the sensor pose on the robot.

Note that most sensors will use the full (6D) CPose3D, but see the derived classes for more details or special cases.

See also
getSensorPose

Definition at line 32 of file CObservation.cpp.

◆ swap()

void CObservation::swap ( CObservation o)
protectedinherited

Swap with another observation, ONLY the data defined here in the base class CObservation.

It's protected since it'll be only called from child classes that should know what else to swap appart from these common data.

Definition at line 37 of file CObservation.cpp.

References mrpt::obs::CObservation::sensorLabel, and mrpt::obs::CObservation::timestamp.

Referenced by mrpt::obs::CObservationStereoImages::swap(), and mrpt::obs::CObservation3DRangeScan::swap().

Here is the caller graph for this function:

◆ unload()

virtual void mrpt::obs::CObservation::unload ( )
inlinevirtualinherited

Unload all images, for the case they being delayed-load images stored in external files (othewise, has no effect).

See also
load

Reimplemented in mrpt::obs::CObservation3DRangeScan, and mrpt::obs::CObservationPointCloud.

Definition at line 161 of file CObservation.h.

◆ writeToMatlab()

virtual mxArray* mrpt::serialization::CSerializable::writeToMatlab ( ) const
inlinevirtualinherited

Introduces a pure virtual method responsible for writing to a mxArray Matlab object, typically a MATLAB struct whose contents are documented in each derived class.

Returns
A new mxArray (caller is responsible of memory freeing) or nullptr is class does not support conversion to MATLAB.

Definition at line 90 of file CSerializable.h.

Member Data Documentation

◆ _init_CObservationBearingRange

mrpt::rtti::CLASSINIT mrpt::obs::CObservationBearingRange::_init_CObservationBearingRange
staticprotected

Definition at line 30 of file CObservationBearingRange.h.

◆ className

constexpr const char* mrpt::obs::CObservationBearingRange::className = "CObservationBearingRange"
static

Definition at line 30 of file CObservationBearingRange.h.

◆ fieldOfView_pitch

float mrpt::obs::CObservationBearingRange::fieldOfView_pitch

Information about the sensor: The "field-of-view" of the sensor, in radians (for pitch ).

Definition at line 45 of file CObservationBearingRange.h.

Referenced by mrpt::maps::CLandmarksMap::simulateRangeBearingReadings(), and mrpt::vision::StereoObs2BRObs().

◆ fieldOfView_yaw

float mrpt::obs::CObservationBearingRange::fieldOfView_yaw

Information about the.

sensor: Ranges, in meters (0: there is no limits) Information about the sensor: The "field-of-view" of the sensor, in radians (for yaw ).

Definition at line 42 of file CObservationBearingRange.h.

Referenced by mrpt::maps::CLandmarksMap::simulateRangeBearingReadings(), and mrpt::vision::StereoObs2BRObs().

◆ maxSensorDistance

float mrpt::obs::CObservationBearingRange::maxSensorDistance {0}

◆ minSensorDistance

float mrpt::obs::CObservationBearingRange::minSensorDistance {0}

◆ runtimeClassId

const mrpt::rtti::TRuntimeClassId mrpt::obs::CObservationBearingRange::runtimeClassId
staticprotected

Definition at line 30 of file CObservationBearingRange.h.

◆ sensedData

TMeasurementList mrpt::obs::CObservationBearingRange::sensedData

The list of observed ranges:

Definition at line 77 of file CObservationBearingRange.h.

Referenced by mrpt::maps::CLandmarksMap::simulateRangeBearingReadings(), and mrpt::vision::StereoObs2BRObs().

◆ sensor_std_pitch

float mrpt::obs::CObservationBearingRange::sensor_std_pitch {0}

◆ sensor_std_range

float mrpt::obs::CObservationBearingRange::sensor_std_range {0}

Taken into account only if validCovariances=false: the standard deviation of the sensor noise model for range,yaw and pitch (in meters and radians).

If validCovariances=true, these 3 values are ignored and the individual 3x3 covariance matrices contain the actual uncertainties for each of the detected landmarks.

Definition at line 93 of file CObservationBearingRange.h.

Referenced by mrpt::maps::CLandmarksMap::simulateRangeBearingReadings().

◆ sensor_std_yaw

float mrpt::obs::CObservationBearingRange::sensor_std_yaw {0}

◆ sensorLabel

std::string mrpt::obs::CObservation::sensorLabel
inherited

An arbitrary label that can be used to identify the sensor.

Definition at line 62 of file CObservation.h.

Referenced by mrpt::obs::CObservation3DRangeScan::convertTo2DScan(), mrpt::hwdrivers::CSICKTim561Eth::decodeScan(), mrpt::hwdrivers::CLMS100Eth::decodeScan(), mrpt::hwdrivers::CRaePID::doProcess(), mrpt::hwdrivers::CRoboPeakLidar::doProcessSimple(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CCANBusReader::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), mrpt::hwdrivers::CHokuyoURG::doProcessSimple(), mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow(), mrpt::hwdrivers::CRaePID::getFullInfo(), mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), mrpt::hwdrivers::COpenNI2Sensor::getNextObservation(), mrpt::hwdrivers::CKinect::getNextObservation(), mrpt::hwdrivers::CBoardSonars::getObservation(), mrpt::hwdrivers::CWirelessPower::getObservation(), mrpt::hwdrivers::CImpinjRFID::getObservation(), mrpt::hwdrivers::CEnoseModular::getObservation(), mrpt::hwdrivers::CBoardENoses::getObservation(), mrpt::hwdrivers::CPhidgetInterfaceKitProximitySensors::getObservation(), mrpt::hwdrivers::CNationalInstrumentsDAQ::grabbing_thread(), mrpt::obs::CObservation6DFeatures::serializeFrom(), mrpt::obs::CObservationPointCloud::serializeFrom(), mrpt::obs::CObservation3DRangeScan::serializeFrom(), mrpt::obs::CObservation6DFeatures::serializeTo(), mrpt::obs::CObservationPointCloud::serializeTo(), mrpt::obs::CObservation3DRangeScan::serializeTo(), and mrpt::obs::CObservation::swap().

◆ sensorLocationOnRobot

mrpt::poses::CPose3D mrpt::obs::CObservationBearingRange::sensorLocationOnRobot

The position of the sensor on the robot.

Definition at line 49 of file CObservationBearingRange.h.

Referenced by getSensorPose(), setSensorPose(), and mrpt::maps::CLandmarksMap::simulateRangeBearingReadings().

◆ timestamp

mrpt::system::TTimeStamp mrpt::obs::CObservation::timestamp {mrpt::system::now()}
inherited

The associated UTC time-stamp.

Where available, this should contain the accurate satellite-based timestamp of the sensor reading.

See also
getOriginalReceivedTimeStamp(), getTimeStamp()

Definition at line 60 of file CObservation.h.

Referenced by mrpt::obs::CObservation3DRangeScan::convertTo2DScan(), mrpt::hwdrivers::CSICKTim561Eth::decodeScan(), mrpt::hwdrivers::CLMS100Eth::decodeScan(), mrpt::detectors::CObjectDetection::detectObjects(), mrpt::hwdrivers::CRaePID::doProcess(), mrpt::hwdrivers::CGPSInterface::doProcess(), mrpt::hwdrivers::CRoboPeakLidar::doProcessSimple(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CCANBusReader::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), mrpt::hwdrivers::CHokuyoURG::doProcessSimple(), mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow(), mrpt::hwdrivers::CRaePID::getFullInfo(), mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), mrpt::hwdrivers::COpenNI2_RGBD360::getNextObservation(), mrpt::hwdrivers::CKinect::getNextObservation(), mrpt::hwdrivers::CBoardSonars::getObservation(), mrpt::hwdrivers::CWirelessPower::getObservation(), mrpt::hwdrivers::CImageGrabber_OpenCV::getObservation(), mrpt::hwdrivers::CEnoseModular::getObservation(), mrpt::hwdrivers::CBoardENoses::getObservation(), mrpt::hwdrivers::CPhidgetInterfaceKitProximitySensors::getObservation(), mrpt::hwdrivers::CImageGrabber_dc1394::getObservation(), mrpt::hwdrivers::CImageGrabber_FlyCapture2::getObservation(), mrpt::hwdrivers::CDUO3DCamera::getObservations(), mrpt::obs::CObservation::getOriginalReceivedTimeStamp(), mrpt::obs::CObservation::getTimeStamp(), mrpt::hwdrivers::CNationalInstrumentsDAQ::grabbing_thread(), mrpt::maps::CLandmarksMap::loadOccupancyFeaturesFrom2DRangeScan(), mrpt::maps::CLandmarksMap::loadSiftFeaturesFromImageObservation(), mrpt::maps::CLandmarksMap::loadSiftFeaturesFromStereoImageObservation(), mrpt::hwdrivers::CGPSInterface::parse_NMEA(), mrpt::obs::CObservation6DFeatures::serializeFrom(), mrpt::obs::CObservationPointCloud::serializeFrom(), mrpt::obs::CObservation3DRangeScan::serializeFrom(), mrpt::obs::CObservation6DFeatures::serializeTo(), mrpt::obs::CObservationPointCloud::serializeTo(), mrpt::obs::CObservation3DRangeScan::serializeTo(), mrpt::maps::CLandmarksMap::simulateBeaconReadings(), mrpt::maps::CLandmarksMap::simulateRangeBearingReadings(), mrpt::obs::CObservation::swap(), and velodyne_scan_to_pointcloud().

◆ validCovariances

bool mrpt::obs::CObservationBearingRange::validCovariances {false}

True: The individual 3x3 covariance matrices must be taken into account, false (default): All the measurements have identical, diagonal 3x3 covariance matrices given by the values sensor_std_range,sensor_std_yaw,sensor_std_pitch.

Definition at line 84 of file CObservationBearingRange.h.

Referenced by mrpt::maps::CLandmarksMap::simulateRangeBearingReadings(), and mrpt::vision::StereoObs2BRObs().




Page generated by Doxygen 1.8.14 for MRPT 1.9.9 Git: 8fe78517f Sun Jul 14 19:43:28 2019 +0200 at dom jul 14 20:00:11 CEST 2019