class mrpt::hwdrivers::CSwissRanger3DCamera

A class for grabing “range images” from a MESA imaging SwissRanger 3D cameras (SR-2, SR-3000, SR-4k).

NOTES:

This class requires a vendor specific driver installed in the system in order to build MRPT with support for this sensor. Download and install the driver from: http://www.mesa-imaging.ch/drivers.php
The intensity channel (grayscale image) is converted from 16bit to standard 8bit-per-pixel using a logarithmic, modified A-law compression. This allows exploiting the full dynamic range of the sensor and provides quite good results.

As with any other CGenericSensor class, the normal sequence of methods to be called is:

loadConfig() - Or calls to the individual setXXX() to configure the camera parameters.
initialize() - to init the comms with the camera
call getNextObservation() for getting the frames.

This sensor can be also used from within rawlog-grabber.

   PARAMETERS IN THE ".INI"-LIKE CONFIGURATION STRINGS:
  -------------------------------------------------------
    [supplied_section_name]
     sensorLabel  = CAM3D         // A text description
     preview_window  = true       // Show a window with a preview of the
*grabbed data in real-time

     open_USB     = true          // false means ethernet (default: true)
     USB_serial   = 0x4000002f    // only for open_USB=true. If not set, the
*first camera will be open. Serial is the last part of S/N (e.g.  for the
*camera SN: 00-00-40-00-00-2F).
     IP_address   = 192.168.2.14  // only for open_USB=false. The IP of the
*camera.

     // Options for the data to save in each CObservation3DRangeScan
     save_3d            = true          // Save the 3D point cloud (default:
*true)
     save_range_img     = true          // Save the 2D range image (default:
*true)
     save_intensity_img = true          // Save the 2D intensity image
*(default:
*true)
     save_confidence    = true          // Save the estimated confidence 2D
*image
*(default: false)

     enable_img_hist_equal = false      // Enable intensity image histogram
*equalization (default: false)
     enable_median_filter  = true           // Enable median filter in range
*data
*(default: true)
     enable_mediancross_filter = false  // Enable median cross-filter
*(default:
*false)
     enable_conv_gray      = false      // Enable intensity image scale with
*range
*(default: false)
     enable_denoise_anf    = true           // Enable this noise filter
*(default:
*true)

     // Camera calibration parameters: See mrpt::img::TCamera
     //  If not provided, a set of default parameters for a SR4000 camera will
*be loaded.
     resolution = [176 144]
     cx         = 87.99958
     cy         = 68.99957
     fx         = 262.9201
     fy         = 262.9218
     dist       = [-8.258543e-01 6.561022e-01 2.699818e-06 -3.263559e-05 0]

     // For externaly stored images, the format of image files (default=jpg)
     //external_images_format  = jpg
     // (Only when external_images_format=jpg): Optional parameter to set the
*JPEG compression quality:
     //external_images_jpeg_quality = 95    // [1-100]. Default: 95

     pose_x=0.21    // Camera position in the robot (meters)
     pose_y=0
     pose_z=0.34
     pose_yaw=0 // Angles in degrees
     pose_pitch=0
     pose_roll=0

#include <mrpt/hwdrivers/CSwissRanger3DCamera.h>

class CSwissRanger3DCamera: public mrpt::hwdrivers::CGenericSensor
{
public:
    // construction

    CSwissRanger3DCamera();

    //
methods

    void setOpenFromUSB(bool USB);
    bool getOpenFromUSBMode() const;
    void setOpenIPAddress(const std::string& IP);
    std::string getOpenIPAddress() const;
    void setSave3D(bool save);
    void setSaveRangeImage(bool save);
    void setSaveIntensityImage(bool save);
    void setSaveConfidenceImage(bool save);
    void enableImageHistEqualization(bool enable);
    bool isEnabledImageHistEqualization() const;
    void enableMedianFilter(bool enable);
    bool isEnabledMedianFilter() const;
    void enableMedianCrossFilter(bool enable);
    bool isEnabledMedianCrossFilter() const;
    void enableConvGray(bool enable);
    bool isEnabledConvGray() const;
    void enableDenoiseANF(bool enable);
    bool isEnabledDenoiseANF() const;
    void enablePreviewWindow(bool enable = true);
    bool isEnabledPreviewWindow() const;
    virtual void initialize();
    virtual void doProcess();
    void getNextObservation(mrpt::obs::CObservation3DRangeScan& out_obs, bool& there_is_obs, bool& hardware_error);
    bool open();
    void close();
    bool isOpen() const;
    size_t rows() const;
    size_t cols() const;
    unsigned int getCameraSerialNumber() const;
    double getMaxRange() const;
    void setPathForExternalImages(const std::string& directory);
    bool getMesaLibVersion(std::string& out_version) const;
};

Inherited Members

public:
    //
methods

    CGenericSensor& operator = (const CGenericSensor&);
    virtual void doProcess() = 0;

Construction

CSwissRanger3DCamera()

Default ctor.

Methods

void setOpenFromUSB(bool USB)

true: open from USB, false: open from ethernet.

virtual void initialize()

Initializes the 3D camera - should be invoked after calling loadConfig()

This method can or cannot be implemented in the derived class, depending on the need for it.

Parameters:

This	method must throw an exception with a descriptive message if some critical error is found.

virtual void doProcess()

To be called at a high rate (>XX Hz), this method populates the internal buffer of received observations.

This method will be invoked at a minimum rate of “process_rate” (Hz)

This method is mainly intended for usage within rawlog-grabber or similar programs. For an alternative, see getNextObservation()

Parameters:

This	method must throw an exception with a descriptive message if some critical error is found.
This	method must throw an exception with a descriptive message if some critical error is found.

out_obs	The output retrieved observation (only if there_is_obs=true).
there_is_obs	If set to false, there was no new observation.
hardware_error	True on hardware/comms error.