Application: RawLogViewer

1. Purpose of this program

The main goal of the GUI program RawLogViewer is to allow users to quickly inspect, cut, or modify in many different ways a given Rawlog (datasets) gathered by a robot, with the idea of preparing it as the input to some other program, typically for localization (pf-localization) or mapping (kf-slam, rbpf-slam,…):

RawlogViewerRole

Examples of typical operations are extracting just a part of a large dataset, decimating the rawlog if original data was gathered at a very high rate, or modifying the sensor poses with respect to the robot/vehicle frame of reference.

The program also permits importing and exporting datasets to other formats. Limited exporting is also implemented into plain text files, e.g. for processing data in MATLAB. Note that future development of this program will focus on visualization only, while modification of datasets should preferably be done by means of the program rawlog-edit.

This video demonstrates RawLogViewer inspecting some datasets with Velodyne 3D Lidar data, as well as others with 2D lidars and 3D RGB+D cameras:

Another (older) video demonstrating RawLogViewer inspecting RGB+D datasets grabbed with Microsoft Kinect:

2. Interface description

rawlogviewer UI parts
  • Left: The sequence of all the objects stored in the loaded dataset. Click on an object to select it and preview its contents on the other right-hand spaces.

  • Top-right: A textual description of the selected object.

  • Bottom-right: For some objects, a visual preview of the observation contents. For example, a 2D view of a laser scan, the images of a monocular or stereo camera, etc. When no object is selected, this panel displays a summary of the entire dataset, including timing information for each sensor.

3. Important manipulations of a rawlog

Note

The command-line program rawlog-edit provides many other manipulation opportunities for rawlog datasets.

Cut, selective removals, etc

Menu path: “Edit” -> “Edit rawlog…”

Description: This command opens up a dialog with several configurable filters to remove specific parts of a dataset, either by their position in time, or by sensor-type or sensor-label.

RawlogViewer Edit rawlog

Changing the position of sensors

Menu path: “Edit” -> “Change sensor/camera parameters…”

Description: All sensor (observation) objects in a dataset have an associated “pose on the robot”, describing its 6D location on the vehicle frame of reference (e.g. which will be always the origin for hand-held devices). This dialog allows getting and setting this pose to all the objects in a dataset at once. It’s typically used together to sensor labels:

Screenshot-RawlogViewer-Change-sensor-pose-information

Converting a rawlog format: “observations-only” ==> “actions-sensory frame“

Menu path: “Edit” -> “Convert into SF format” -> choose your conversion parameters.

Note: Typically, at least one of the first “actions” will be empty (e.g. without odometry). Check it out by inspecting rawlog entry number “1” in the tree view. If it is empty, it is strongly recommended to cut off those first entries. See how to remove part of a rawlog in section 3.1 above. Continue inspecting the rawlog and, if satisfied, save it as a new rawlog file.

Converting a rawlog format: “actions-sensory frame” ==> “observations-only“

Menu path: “File” -> “Operations on files” -> “Convert to observations-only rawlog”

4. The “maps and paths generation module” dialog

Menu path: “Tools” -> “Open the maps & paths generation module…”

Description: Mostly oriented to datasets with 2D/3D laser scans, this dialog allows quickly inspecting a map built from unprocessed odometry, useful to gain a first quick insight of the environment, and the odometry quality.

5. The Scan-Matching (ICP) module

This module of the RawLogViewer application is a graphical front-end to the ICP algorithms implemented in mrpt-slam. Basically, two sensory frames (or individual observations) from the currently-loaded rawlog are aligned using mrpt::slam::CICP allowing the user to tune all parameters at a glance.

So, you can use this module to tune or trial-and-error tests related to ICP. Optionally, the ICP iterations can be seen visually as an animation.

Note that in the “animate mode” the execution of ICP is intentionally carried out more slowly to ease the step-by-step visualization, though the normal operation usually takes a few milliseconds.

In this first experiment we can see how the threshold value for the maximum distance for establishing a correspondence between the two maps strongly limits the attainable adjustment that the ICP algorithm can perform from the initial position: in a first trial, a threshold of 0.75m is not enough to lead the algorithm to convergence, but it does quickly by changing the threshold to 2.5m:

This second video demonstrates the two reference maps that MRPT’s ICP implementation can handle: a map of points, or a grid map. In this latter case, correspondences are established by matching laser points to occupied cells in the grid:

6. Actions: odometry and its uncertainty

Concepts

For the mathematical details of each probabilistic model read: probabilistic_motion_models.

Modifying the probabilistic motion model

Menu path: Sensors -> Odometry -> Modify motion model…

Description: This dialog allows experimenting with the parameters of two different probabilistic motion models and changing those parameters for all the odometry increments in the rawlog.

Screenshot_topic_motion_model_thrun_0

Modeling the actual uncertainty may be critical for some particle filter-based SLAM methods. As can be seen in the next example, sometimes it is needed to increase the uncertainty of odometry increments up to the point that the real hypothesis after closing a loop is included by the probability distribution of all the potential robot paths:

Screenshot-GenRandomPaths2 Screenshot-GenRandomPaths1

Note how the loop closure cannot be correctly detected by a RBPF SLAM method if the uncertainty in the odometry is over-confident, as in the first of the two images above.

Creating ‘odometry’ from scan-matching

Menu path: Sensors -> Odometry -> Recalculate actions with ICP…

Description: This operation allows “correcting” the wheels-based odometry readings by performing ICP-based scan matching between each pair of consecutive observations. Note that this operation is only implemented for rawlogs in the “SensoryFrame” format.

Screenshot-RawMap-odo.png Screenshot-RawMap-odo-icp

7. Browse point cloud sensors (LIDARs, RGBD)

This video demonstrates RawLogViewer inspecting some datasets with Velodyne 3D Lidar data, as well as others with 2D lidars and 3D RGB+D cameras:

8. Browse images

Menu path: Sensors -> Images -> Show images as a video…

Description: This module allows visualizing all existing imaging sensors in a dataset as a video sequence or just peeking through the entire duration using a scrollbar:

Screenshot-Play_images_in_a_Rawlog_as_a_video

Note that this works for monocular cameras, stereo cameras and the intensity channel of 3D cameras.

9. Generating a ground truth path from rawlogs with 3 RTK GPS

This specifically applies to rawlogs described in this paper.

Instructions:

  • Load the rawlog.

  • Click the “Raw map” button.

  • If desired, mark the desired range of entries to process in the controls on the top.

  • Also set a decimation>1 if you don’t mind not to insert all laser scans in the 3D map, making the process a bit faster.

  • Click “Map from RTK GPS”.

  • The map should appear in the main area at the bottom. By hitting “Save vehicle path…”, the reconstructed ground truth will be dumped to text files.